Sony DR-BT30Q User Manual
20
Disposing of the unit
For environmental conservation, be sure to remove the built-in rechargeable
batteries from the unit before disposing, and dispose of the batteries
appropriately.
batteries from the unit before disposing, and dispose of the batteries
appropriately.
ADDITIONAL INFORMATION
1
Remove the screw on
the right housing using
a cross-point
screwdriver.
the right housing using
a cross-point
screwdriver.
2
Put your finger beside
the POWER button, and
detach the cover by
unhooking the claws.
the POWER button, and
detach the cover by
unhooking the claws.
If the opening is narrow, use a
flat screwdriver to unhook the
claws.
flat screwdriver to unhook the
claws.
Battery
3
Unhook the claws on
both sides of the jog
switch to detach the
board, and hold up the
board by the jog switch.
both sides of the jog
switch to detach the
board, and hold up the
board by the jog switch.
Note
While holding up the board, be
careful not to break any wires
inside.
careful not to break any wires
inside.
4
Detach the battery
connector, and remove
the battery by prizing up
the tab.
connector, and remove
the battery by prizing up
the tab.
1
2
3
Claws (inside housing)