Sony PDW-R1 User Manual

Chap

te

r 7
  

 Men

u

s

95

7-2 Basic Setup Menu

With the SHUTTLE button held down, rotate the jog 
dial or shuttle dial to change the setting.

The displays in the video panel, on an external 
monitor, and in the time data display section change as 
shown below when you hold down the SHUTTLE 
button. In the time data display section, the currently 
selected setting value flashes to indicate that you can 
change it to another value.

Press the SET button.

This saves the new setting value, and the menu display 
disappears from the video panel, the external monitor, 
and the time data display section.

To abandon making a change
Press the MENU button before pressing the SET 
button.
The menu display disappears from the video panel, the 
external monitor, and the time data display section 
without the new setting value being saved.

To reset the current active menu settings to their factory 
default values, proceed as follows.

Press the MENU button.

The menu appears in the video panel, on an external 
monitor to which the output of the VIDEO OUT 2 
(SUPER)/SDI OUT (SUPER) connector is input, and 
in the time data display section.

Press the RESET button.

The message “INITIALIZE ALL ITEMS TO 
FACTORY PRESET VALUES?” appears in the video 
panel and on the external monitor.
The message “Init setup?” appears in the time data 
display.

To abandon operations and return to the setup 
menu display
Press the RESET button again.

Press the SET button.

The menu settings are reset to their factory default 
settings.

To switch between 525(U) line, 525(J) line and 625 line 
operation modes, proceed as follows.

Press the MENU button.

Turn the jog dial or shuttle dial to display menu item 
013 in the time data display.

   BLANK LINE SELECT       

        ITEM-703

*  ALL LINE      -   ---
   LINE 12       -  blnk

-

-

-

-

Cursor indicating the currently selected sub-item

Sub-item number (flashing while changing)

        ITEM-001

         5 sec

      PREROLL TIME

Setting value

Setting value (flashing while changing)