Sony NSX-HMA56 User Manual

 25

Refer to the operating instructions of the connected equipment
for details.
• The connecting cords are not supplied. Obtain the necessary

connecting cords.

• Consult your local Aiwa dealer for optional equipment.

This unit can input analog sound signals through these jacks.
Use a cable with RCA phono plugs to connect audio equipment
(turntables, LD players, MD players, VCRs, TV, etc.).
Connect the red plug to the VIDEO/AUX R jack, and the white
plug to the VIDEO/AUX L jack.

When connecting a turntable
 Use an Aiwa turntable equipped with a built-in equalizer amplifier.

This unit can output CD digital sound signals through this jack.
Use an optical cable to connect digital audio equipment (DAT
deck, MD recorder, etc.).
Remove the dust cap 

a

 from the CD DIGITAL OUT (OPTICAL)

jack. Then, connect an optical cable plug to the CD DIGITAL
OUT (OPTICAL) jack.

When the CD DIGITAL OUT (OPTICAL) jack is not being
used
Attach the supplied dust cap.

Connect an optional powered sub woofer with built-in-amplifier
to the jack.

To play equipment connected to the VIDEO/AUX jacks proceed
as follows.

“VIDEO” appears on the display.

To change a source name in the display
When VIDEO/AUX is pressed, “VIDEO” is displayed initially.  It
can be changed to “VIDEO”, “AUX” or “TV”.
With the power on, press POWER while pressing VIDEO/AUX.
Repeat the procedure to select one of the names.

To adjust the sound level of the external source
When the sound level of the external source is much higher or
much lower than that of other function sources, adjust it as follows.
1 Press VIDEO/AUX and play the equipment.
2 Press 

f

 or 

g

 so that the sound level becomes the same

as that of other function sources.

During recording, the sound level can not be adjusted.