Sony PDW-HD1500 User Manual
108
Maintenance Menu
Chapt
er
7
Men
u
s
Maintenance Menu
Items in the maintenance menu
The following tables show the items in the maintenance
menu.
• Item names are the names which appear on the video
menu.
• Item names are the names which appear on the video
monitor of this unit and an external monitor to which the
output of the COMPOSITE OUTPUT 2 (SUPER)
connector, the SDSDI OUTPUT 2 (SUPER) connector,
or the HDSDI OUTPUT 2 (SUPER) connector is input.
An abbreviated name appears in the time data display
area when you press the NEXT button.
output of the COMPOSITE OUTPUT 2 (SUPER)
connector, the SDSDI OUTPUT 2 (SUPER) connector,
or the HDSDI OUTPUT 2 (SUPER) connector is input.
An abbreviated name appears in the time data display
area when you press the NEXT button.
• The values in the Settings columns are the values which
appear in the time data display area. (The values may
appear in a different format on an external monitor. In
appear in a different format on an external monitor. In
this case, the external monitor values are shown in
parentheses.) Underlined values are the factory defaults.
parentheses.) Underlined values are the factory defaults.
This manual does not explain the menu items in M0:
CHECK, M1: ADJUST, M2: SERVICE SUPPORT, and
M6: DRIVE. Refer to the Maintenance Manual for an
explanation of these items.
CHECK, M1: ADJUST, M2: SERVICE SUPPORT, and
M6: DRIVE. Refer to the Maintenance Manual for an
explanation of these items.
Refer to the Maintenance Manual for more detailed
information about the menu items in M3:OTHERS,
M4:SETUP MAINTENANCE, and M5:NETWORK.
information about the menu items in M3:OTHERS,
M4:SETUP MAINTENANCE, and M5:NETWORK.
M3: OTHERS: Other setting items
Item
Setting
M30: SOFTWARE VERSION
Display of the software version of this unit
M31: SERIAL NUMBER
Display and correction of the serial number of this unit
M36: HOURS METER RESET
Display and reset of the hours meter and the thread counter
M37: AUDIO
CONFIG
CONFIG
M370: METER HEAD
ROOM
ROOM
Select the audio reference level (headroom).
20dB, 18dB, 16dB, 12dB, EBUL
20dB, 18dB, 16dB, 12dB, EBUL
Note
EBUL can be selected only when the system frequency is 50i.
M372: NON-AUDIO
INPUT
INPUT
Select whether to handle digital audio signals as non-audio signals during
recording.
Audio (audio): Handle as linear PCM audio signals.
data: Handle as non-audio signals.
recording.
Audio (audio): Handle as linear PCM audio signals.
data: Handle as non-audio signals.
Sub-Item
1 Tr1/Tr2
2 Tr3/Tr4
3 Tr5/Tr6
4 Tr7/Tr8
M373: INPUT LEVEL
Set the upper limit for the signal level input to audio channels 1/3 or 2/4.
+4dB, 0dB, –3dB, –6dB, EBUL
+4dB, 0dB, –3dB, –6dB, EBUL
Note
EBUL can be selected only when the system frequency is 50i.
Sub-Item
1 CH1/CH2
2 CH3/CH4
M377: OUTPUT LEVEL
Set the reference level for audio output signals.
+4dB, 0dB, –3dB, –6dB, EBUL
+4dB, 0dB, –3dB, –6dB, EBUL
Note
EBUL can be selected only when the system frequency is 50i.
M38: F-KEY
CONFIG
CONFIG
M380: HOME2
Assign a function menu item to page HOME2 of the function menu as a user
setting.
setting.
M381: PAGE7 ASSIGN
Assign a setup menu item to page P7 of the function menu as a user setting.
M382: PAGE7 NAME
Specify the name of a setup menu item assigned with M381: PAGE7 ASSIGN.
M38F: NV-RAM
CONTROL
CONTROL
Save the settings of M380 to M382.