Sony PDW-HD1500 User Manual
83
FTP File Operations
Cha
p
te
r 6
F
ile
O
per
a
tio
ns
Do not disconnect the cable before performing steps 1 and
2.
2.
1
Eject the disc by clicking the eject button to the right
of the icon for this unit in the Finder, or by dragging
the icon for this unit from the Finder to the Trash.
of the icon for this unit in the Finder, or by dragging
the icon for this unit from the Finder to the Trash.
2
Disconnect the i.LINK cable as required.
To make a reconnection
To reconnect after exiting file operations, do one of the
following, depending on whether an i.LINK cable is
connected.
i.LINK cable is not connected: Connect this unit and a
following, depending on whether an i.LINK cable is
connected.
i.LINK cable is not connected: Connect this unit and a
remote computer with an i.LINK cable.
i.LINK cable is connected: The unit is mounted
automatically, so you do not need to do anything.
The unit is powered off and an i.LINK cable is
connected: Power the unit on.
FTP File Operations
File operations between this unit and a remote computer
can be carried out by the File Transfer Protocol (called
FTP below).
can be carried out by the File Transfer Protocol (called
FTP below).
Preparations
1
Connect the network connectors of this unit and a
remote computer with a network cable (see
connections illustration on page 28). Or connect this
unit to the network to which the remote computer is
connected (see connections illustration on page 28).
remote computer with a network cable (see
connections illustration on page 28). Or connect this
unit to the network to which the remote computer is
connected (see connections illustration on page 28).
2
Set the IP address and other network setting items for
this unit.
this unit.
1)
If network settings have already been made
Check the IP address of this unit.
Check the IP address of this unit.
1)This unit is able to acquire an IP address automatically from a DHCP
server. It also supports an Auto-IP function to assign an IP address
automatically when access from this unit to the DHCP server times
out. You can check DHCP settings and the assigned IP address on
page M5:NETWORK of the maintenance menu.
automatically when access from this unit to the DHCP server times
out. You can check DHCP settings and the assigned IP address on
page M5:NETWORK of the maintenance menu.
3
Set the remote control switch to “NET” (see page 13).
Making FTP connections
FTP connections between this unit and a remote computer
can be made with either of the following.
• The command prompt
• FTP client software
can be made with either of the following.
• The command prompt
• FTP client software
This section explains how to use the command prompt. For
more information about using FTP client software, refer to
the documentation of the FTP client software on your
system.
more information about using FTP client software, refer to
the documentation of the FTP client software on your
system.
An FTP client that supports UTF-8 is required to use
Unicode characters other than ASCII characters.
Command prompt FTP commands do not support UTF-8.
Unicode characters other than ASCII characters.
Command prompt FTP commands do not support UTF-8.
Note
Note