ONKYO C-7000R User Manual

En

Note

• If the remote controller doesn’t work reliably, try replacing the 

batteries.

• Don’t mix new and old batteries or different types of batteries.

• If you intend not to use the remote controller for a long time, 

remove the batteries to prevent damage from leakage or 
corrosion.

• Remove expired batteries as soon as possible to prevent damage 

from leakage or corrosion.

To use the remote controller, point it at the compact disc 
player’s remote control sensor, as shown below.

Note

• The remote controller may not work reliably if the compact disc 

player is subjected to bright light, such as direct sunlight or 
inverter-type fluorescent lights. Keep this in mind when 
installing.

• If another remote controller of the same type is used in the same 

room, or the compact disc player is installed close to equipment 
that uses infrared rays, the remote controller may not work 
reliably.

• Don’t put anything, such as a book, on the remote controller, 

because the buttons may be pressed inadvertently, thereby 
draining the batteries.

• The remote controller may not work reliably if the compact disc 

player is installed in a rack behind colored glass doors. Keep this 
in mind when installing.

• The remote controller will not work if there’s an obstacle 

between it and the compact disc player’s remote control sensor.

Install the compact disc player on a sturdy rack or shelf. 
Position it so that its weight is evenly dispersed on its four 
legs. Do not install the compact disc player in a place with 
vibration or an unstable location.

Remote control sensor

Compact disc player

Approx. 16 ft. (5 m)

30° off center 
(Left/Right)