Franklin S - J Series User Manual

 

Before Installation be sure to read all the 
instructions and warnings carefully. Refer to the 
product data plates for additional operating instruction 
and specifi cations.

Examine the equipment when received. Notify your 
dealer or carrier of any damage or missing parts. Verify 
that the equipment is of size and model specifi ed.

Meet National Electrical Code, Canadian Electrical 
Code, and local codes for all wiring.

Follow wiring instructions in this manual when 
connecting motor to power lines.

All S & J Series pumps are designed for fl ooded suction 
(all suction fi ttings and suction piping are below water 
level) and will not self-prime.

This is the safety alert symbol.  When you see 
this symbol on your pump or in this manual, look 

for one of the following signal words and be alert to the 
potential for personal injury:

 warns about hazards that 

will

 cause 

serious personal injury, death or major property damage 
if ignored.

 warns about hazards that can cause 

serious personal injury, death or major property damage 
if ignored.

 warns about hazards that will or can 

cause minor personal injury or major property damage if 
ignored.

The label NOTICE indicates special instructions, which 
are important but not related to hazards.

Keep safety labels in good 
condition. 

Replace missing or damaged 
safety labels.

Ground motor before 
connecting to power supply.

Ground pump before
connecting to power
supply. Disconnect
power before working
on pump, motor 
or tank.