Sony SCD-XE670 User Manual

This player comes with the following items:

• Audio connecting cord

phono jack 

×

 2 (Red and White) 

y phono

jack 

×

 2 (Red and White)  (2)

phono jack 

×

 1 (Black) 

y phono jack 

×

 1

(Black)  (2)

• Remote commander RM-SX700 (1)
• R6 (size AA) batteries (2)

You can control the player using the supplied
remote.

Insert two R6 (size AA) batteries by matching
the + and – on the batteries to the diagram
inside the battery compartment.

Insert the negative (–) end first, then push in
and down until the positive (+) end clicks into
position.

When using the remote, point it at the remote
sensor 

 on the player.

z

Under normal conditions, the batteries should last for
about six months.  When the remote no longer
operates the player, replace both batteries with new
ones.

• Do not leave the remote in an extremely hot or a

humid place.

• Do not drop any foreign object into the remote

casing, particularly when replacing the batteries.

• Do not use a new battery with an old one.
• Do not expose the remote sensor to direct sunlight

or lighting apparatus.  Doing so may cause a
malfunction.

• If you do not intend to use the remote for an

extended period of time, remove the batteries to
avoid possible damage from battery leakage and
corrosion.

Connect the Super Audio CD player to an
audio component. Be sure to turn off the power
of all components before making connections
and connect securely to prevent noise.

When you have an amplifier equipped with the
5.1CH input jacks (multi-channel amplifier,
AV amplifier, etc.) and connect the player and
the amplifier via ANALOG 5.1CH OUT jacks,
you can play a multi-channel Super Audio CD
and enjoy the multi-channel playback.

For normal playback, connect the player and an
amplifier via ANALOG 2CH OUT jacks.

Use audio connecting cords for this connection.
Connect the ANALOG 5.1CH OUT jacks
(FRONT L/R, SURR L/R, CENTER,
SUBWOOFER) to the corresponding jacks of
your amplifier. For FRONT or SURR
connection, use the connecting cords (Red and
White jacks) and be sure to match the colour-
coded pin to the appropriate jacks: white (left)
to white and red (right) to red. For CENTER
and SUB WOOFER connection, use the
connecting cords (Black).