Sony DVP-F25 Manual
64
Additional Information
Troubleshooting
If you experience any of the following
difficulties while using the player, use this
troubleshooting guide to help remedy the
problem before requesting repairs. Should
any problem persist, consult your nearest
Sony dealer.
difficulties while using the player, use this
troubleshooting guide to help remedy the
problem before requesting repairs. Should
any problem persist, consult your nearest
Sony dealer.
Power
The power is not turned on.
, Check that the AC power cord is connected
securely.
Picture
There is no picture/picture noise appears.
, Re-connect the connecting cord securely.
, The connecting cord is damaged.
, Check the connection to your TV (page 16)
, The connecting cord is damaged.
, Check the connection to your TV (page 16)
and switch the input selector on your TV so
that the signal from the player appears on
the TV screen.
that the signal from the player appears on
the TV screen.
, The disc is dirty or flawed.
, If the picture output from your player goes
, If the picture output from your player goes
through your VCR to get to your TV or if
your player is connected to a combination
TV/VIDEO player, the copy-protection
signal applied to some DVD programs
could affect picture quality. If you still
experience problems even when you
connect your player directly to your TV,
please try connecting your player to your
TV’s S VIDEO input (page 16).
your player is connected to a combination
TV/VIDEO player, the copy-protection
signal applied to some DVD programs
could affect picture quality. If you still
experience problems even when you
connect your player directly to your TV,
please try connecting your player to your
TV’s S VIDEO input (page 16).
Even though you set the aspect ratio in “TV
TYPE” of “SCREEN SETUP,” the picture
does not fill the screen.
TYPE” of “SCREEN SETUP,” the picture
does not fill the screen.
, The aspect ratio of the disc is fixed on your
DVD.
Sound
There is no sound.
, Re-connect the connecting cord securely.
, The connecting cord is damaged.
, The player is connected to the wrong input
, The connecting cord is damaged.
, The player is connected to the wrong input
, The amplifier (receiver) input is not
correctly set.
, The player is in pause mode or in Slow-
motion Play mode.
, The player is in fast forward or fast reverse
mode.
, If the audio signal does not come through
the DIGITAL OUT (OPTICAL) jack, check
the audio settings (page 63).
the audio settings (page 63).
Sound is noisy.
, When playing a CD with DTS sound tracks,
Sound distortion occurs.
, Set “AUDIO ATT” in “AUDIO SETUP” to
“ON” (page 62).
The sound volume is low.
, The sound volume is low on some DVDs.
The sound volume may improve if you set
“AUDIO DRC” to “TV MODE” (page 62).
“AUDIO DRC” to “TV MODE” (page 62).
, Set “AUDIO ATT” in “AUDIO SETUP” to
“OFF” (page 62).
Operation
The remote does not function.
, There are obstacles between the remote and
the player.
, The distance between the remote and the
player is too far.
, The remote is not pointed at the remote
sensor on the player.
, The remote sensor of the player is exposed
to strong light.
, The batteries in the remote are weak.
The disc does not play.
, There is no disc inside.
, The disc is turned over.
, The disc is turned over.
Insert the disc with the labeled (or non-
playback) side facing the disc window.
playback) side facing the disc window.
, The player cannot play certain discs (page 6).
, The region code on the DVD does not match
, The region code on the DVD does not match
the player.
, Moisture has condensed inside the player
, The player cannot play CD-Rs, CD-RWs,
DVD-Rs, or DVD-RWs (video mode) that
are not finalized (page 6).
are not finalized (page 6).