Sony CDX-CA900X User Manual

Page of 84
17
Adjusting the sound 
characteristics
You can adjust the bass, treble, balance, fader, 
and subwoofer volume.
1
Select the item you want to adjust by 
pressing 
(SOUND)
 repeatedly.
Each time you press (SOUND), the item 
changes as follows:
BAS (bass)
 
t
 
TRE (treble)
 
t
 
BAL (left-right)
 
FAD (front-rear) 
SUB (subwoofer volume)
2
Adjust the selected item by pressing 
<
 or 
,
.
Note
Adjust within 3 seconds after selecting the item. 
Quickly attenuating the 
sound 
(With the rotary commander or the card 
remote commander)
Press 
(ATT)
.
“ATT·······on” appears in the display 
momentarily.
To restore the previous volume level, press 
(ATT) again.
Tip
When the interface cable of a car telephone is 
connected to the ATT lead, the unit decreases the 
volume automatically when a telephone call comes in 
(Telephone ATT function).
Changing the sound and 
display settings
— Menu
The following items can be set:
 (Set Up)
• Clock (page 9)
• Beep — to turn the beeps on or off.
• AUX-A (page 21) — to turn the AUX source 
display on or off.
 (Display)
• D.Info (Dual Information) — to display the 
clock and the play mode at the same time (on).
• SA (Spectrum Analyzer) (page 21) — to 
change the display pattern of the sound signal 
level.
• Dimmer — to change the brightness of the 
display.
– Select “Auto” to dim the display only when 
you turn the lights on.
– Select “on” to dim the display.
– Select “off” to deactivate the Dimmer.
• Contrast — to adjust the contrast if the 
indications on the display are not recognizable 
because of the unit’s installation position.
• A.Scroll (Auto Scroll)
– Select “on” to scroll all automatically 
displayed names exceeding 12 characters.
– When Auto scroll is set to off and the disc/
album/track is changed, the disc/album/track 
name or ID3 tag does not scroll.
• Demo
– Select “on” to activate the Demo display. 
The Demo display will appear about 10 
seconds after the unit is turned off.
 (Play Mode)
• Local on/off (Local seek mode) (page 14)
– Select “on” to only tune into stations with 
stronger signals.
• Mono on/off (Monaural mode) (page 14)
– Select “on” to hear FM stereo broadcasts in 
monaural. Select “off” to return to normal 
mode.
• IF Auto/Wide (page 14)
continue to next page 
t