Sony CDU948S User Manual

■

●

Avoid placing the drive in a location subject to:
– high humidity
– high temperature
– excessive dust
– mechanical vibration
– direct sunlight.

Only horizontal drive operation recommended, not tilted.

■

●

Do not move drive during operation, it may cause an error.

●

Avoid exposing the drive to sudden temperature changes as 
condensation may form on a lens inside the drive. Should the 
surrounding temperature suddenly rise during operation, wait at least 
1 hour before turning off power. Operation immediately after a 
temperature rise may cause a malfunction as well.

■

●

Keep the original packing materials for future transport of the drive. 

●

Remove caddy before moving or repackaging drive.

Before starting this section, you may wish to consult your computer’s 
manual for a more detailed description of installing new hardware. 
Our example assumes an IBM-PC/AT compatible computer, a SCSI 
adapter card and a SCSI interface cable (50 pin flat) are supplied.

Assure a SCSI adapter is installed before installing the CD-R drive.

●

Prepare the necessary parts and tools not supplied:
– a screwdriver
– Two mounting rails if computer has mounting tracks.

●

Precautions/Hardware Installation      7

GND

GND

F-GND

L GND R

AUDIO OUT

TEST MODE
PREVENT/ALLOW
ID SELECT
DEVICE TYPE

0   1   2

5V

±

5%   GND   12V

±

10%

DC INPUT

INTERFACE CONNECTOR

CD Caddy

CD Caddy

6     Location and Function of Parts and Controls

This indicator shows the unit’s status in various phases of operation.

●

Seek, read and write:

Flashes amber

●

Error:

Lights up amber and stays lit

When the power is turned on, the indicator lights up green.