Sony CDX-F605X Manual

Page of 40
9
Receiving a station through a list 
— LIST
You can list up the frequency or the name. For 
details on labeling a station, see page 10.
(With the card remote commander)
1
Select the band, then press (LIST).
The frequency or station name appears.
2
Press 
M or m repeatedly until the 
desired station appears.
3
Press (ENTER) to receive the station.
Other functions
Changing the sound settings
Adjusting the sound 
characteristics
You can adjust the bass, treble, balance, fader 
and subwoofer volume.
1
Select a source, then press (SOUND) 
repeatedly to select the desired item.
The item changes as follows:
BASS (bass) 
TREBLE (treble) t 
BALANCE (left-right) 
FADER (front-rear) 
SUB WOOFER (subwoofer volume)*
“ 
” is displayed at the lowest setting, and can be 
adjusted up to 20 steps.
2
Rotate the volume control dial 
repeatedly to adjust the selected item.
After 3 seconds, the setting is complete and 
the display returns to normal play/reception 
mode.
Note
Adjust within 3 seconds of selecting the item.
With the card remote commander
In step 2, to adjust the selected item, press 
< or ,.
Customizing the equalizer curve 
— EQ7 Tune
You can adjust and store the equalizer settings 
for different tone ranges.
(With the card remote commander)
1
Select a source, then press (MENU).
2
Press 
M or m repeatedly until “EQ7 
Tune” appears, then press (ENTER).
3
Press 
< or , repeatedly to select the 
desired equalizer type, then press 
(ENTER).
4
Press 
< or , repeatedly to select the 
desired frequency.
The frequency changes as follows:
62Hz 
157Hz y 396Hz y 1.0kHz 
2.5kHz y 6.3kHz y 16kHz
5
Press 
M or m repeatedly to adjust the 
desired volume level.
The volume level is adjustable in 1 dB steps, 
from –10 dB to +10 dB.
continue to next page 
t