Sony CDX-3100 User Manual
9
Actual total number:
Sony CDX-3100 (
E
,F,G,I) 3-810-605-42 (1)
EN
Other Functions
Adjusting the Sound
Characteristics
Characteristics
1
Select the item you want to adjust by
pressing the SEL button repeatedly.
pressing the SEL button repeatedly.
VOL (volume) n BAS (bass) n TRE
(treble) n BALANCE (balance) n FADER
(fader) n VOL (volume) n ···
(treble) n BALANCE (balance) n FADER
(fader) n VOL (volume) n ···
2
Adjust the selected item by pressing
either side of the +/– button.
either side of the +/– button.
Adjust within three seconds after selecting.
(After three seconds the buttons will again
serve as volume control buttons.)
(After three seconds the buttons will again
serve as volume control buttons.)
Enjoying Bass and Treble
at Low Volume
at Low Volume
— Loudness Function
Press the
2
REPEAT
button while pressing
SEL button. n “LOUD” will appear on
the display.
The bass and treble will be boosted.
To cancel, press again.
the display.
The bass and treble will be boosted.
To cancel, press again.
Muting the Sound Quickly
— Mute Function
Press the
MUTE
button. n The “MUTE”
indication flashes.
The sound is muted at once.
To restore the previous volume level, press
again.
The sound is muted at once.
To restore the previous volume level, press
again.
This function will be also cancelled when:
— + side of the +/– or OFF button is pressed.
— ejecting a CD by pressing the 6 button during CD
— ejecting a CD by pressing the 6 button during CD
playback.
Muting the Beep Tone
Press the
6
button while pressing
the SEL button.
To reactivate the beep tone, press these buttons
once more.
To reactivate the beep tone, press these buttons
once more.
Note
When connecting an optional power amplifier to the LINE
OUT, the beep tone is disabled.
When connecting an optional power amplifier to the LINE
OUT, the beep tone is disabled.
Turning on the Clock
Display
Display
— Power Select Function
Only for cars with an accessory position on the
ignition key switch
ignition key switch
To turn the Power Select Function ON
Press the
Press the
OFF
button while pressing
the SEL button.
The Power select Function ties the clock
display power to the accessory position on the
ignition key switch.
To avoid battery wear, the clock is not
displayed while the unit is initializing.
The Power select Function ties the clock
display power to the accessory position on the
ignition key switch.
To avoid battery wear, the clock is not
displayed while the unit is initializing.
Radio Reception/Other Functions