Sony CDX-FW700 User Manual
20
Changing the operative direction
The operative direction of controls is factory-set
as shown below.
as shown below.
If you need to mount the rotary commander on
the right hand side of the steering column, you
can reverse the operative direction.
the right hand side of the steering column, you
can reverse the operative direction.
Press
(SOUND)
for 2 seconds while
pushing the VOL control.
Adjusting the sound
characteristics
characteristics
You can adjust the bass, treble, balance, fader,
and subwoofer volume.
and subwoofer volume.
1
Press
(SOUND)
repeatedly to select
the desired item.
Each time you press (SOUND), the item
changes as follows:
changes as follows:
BASS (bass)
t
TREBLE (treble)
t
BALANCE (left-right)
t
FADER (front-rear)
t
SUB (subwoofer volume)
2
Adjust the level of a selected item by
pressing
pressing
<
or
,
.
After 3 seconds, the display returns to the
normal play mode.
normal play mode.
Note
Adjust within 3 seconds after selecting the item.
Adjust within 3 seconds after selecting the item.
Tips
• When adjusting with the unit, press
• When adjusting with the unit, press
(SOUND)
repeatedly and then rotate the volume control dial.
• When adjusting with the rotary commander, press
(SOUND)
repeatedly and then rotate the VOL
control.
Quickly attenuating the
sound
sound
(With the rotary commander or the card
remote commander)
remote commander)
Press
(ATT)
.
“ATT-on” appears in the display momentarily.
To restore the previous volume level, press
(ATT) again.
(ATT) again.
Tip
When the interface cable of a car telephone is
connected to the ATT lead, the unit decreases the
volume automatically when a telephone call comes in
(Telephone ATT function).
When the interface cable of a car telephone is
connected to the ATT lead, the unit decreases the
volume automatically when a telephone call comes in
(Telephone ATT function).
To increase
To decrease