Sony CDX-CA680X User Manual
15
Radio
The unit can store up to 6 stations per band
(FM1, FM2, FM3, MW, and LW).
(FM1, FM2, FM3, MW, and LW).
Caution
When tuning in stations while driving, use Best
Tuning Memory to prevent accidents.
Tuning Memory to prevent accidents.
Storing stations
automatically
automatically
— Best Tuning Memory (BTM)
The unit selects the stations with the strongest
signals within the selected band, and stores them
in the order of their frequency.
signals within the selected band, and stores them
in the order of their frequency.
1
Press
(SOURCE)
repeatedly to select
the radio.
2
Press
(MODE)
repeatedly to select the
band.
3
Press
(SENS)
(BTM) for 2 seconds.
The unit stores stations in the order of their
frequencies on the number buttons.
A beep sounds when the setting is stored.
frequencies on the number buttons.
A beep sounds when the setting is stored.
Notes
• If only a few stations can be received due to weak
• If only a few stations can be received due to weak
signals, some number buttons will retain their former
settings.
settings.
• When a number is indicated in the display, the unit
starts storing stations from the one currently
displayed.
displayed.
Receiving the stored stations
1
Press
(SOURCE)
repeatedly to select
the radio.
2
Press
(MODE)
repeatedly to select the
band.
3
Press the number button (
(1)
to
(6)
)
on which the desired station is stored.
If preset tuning does not work
— Automatic tuning/Local Seek Mode
Automatic tuning:
Press
(SEEK)
(+) or
(SEEK)
(–) to
search for the station.
Scanning stops when the unit receives a
station. Repeat the operation until the desired
station is received.
station. Repeat the operation until the desired
station is received.
Local Seek Mode:
If the automatic tuning stops too
frequently, press
frequently, press
(SENS)
(BTM)
repeatedly until “LOCAL-ON” appears.
Only the stations with relatively strong
signals will be tuned in.
signals will be tuned in.
To cancel the local seek mode, select “LOCAL-
OFF.”
OFF.”
Tip
If you know the frequency of the station you want to
listen to, press and hold
If you know the frequency of the station you want to
listen to, press and hold
(SEEK)
(+) or
(SEEK)
(–) to
locate the approximate frequency, then press
(SEEK)
(+) or
(SEEK)
(–) repeatedly to fine adjust to
the desired frequency (manual tuning).
continue to next page
t
“LCL” indicator is displayed