Sony MDS-JB980 User Manual
8
GB
Required cord
USB cable (supplied)
Notes
•
Do not use a USB hub or USB extension cable
between the MD deck and the computer. Be sure to
connect the MD deck directly to the computer with
the supplied USB cable.
between the MD deck and the computer. Be sure to
connect the MD deck directly to the computer with
the supplied USB cable.
•
Make sure the USB connector is straight when you
insert it. Inserting it at an angle may damage the
connector parts.
insert it. Inserting it at an angle may damage the
connector parts.
•
Be sure to install the OpenMG Jukebox software to
the computer before you connect the MD deck and
the computer by the USB cable. Otherwise, the
computer may select an inappropriate driver for the
MD deck when you connect them, and the MD deck
may not work correctly.
The [Add New hardware wizard] may appear when
you connect the MD deck to the computer. If this
happens, click [Cancel].
the computer before you connect the MD deck and
the computer by the USB cable. Otherwise, the
computer may select an inappropriate driver for the
MD deck when you connect them, and the MD deck
may not work correctly.
The [Add New hardware wizard] may appear when
you connect the MD deck to the computer. If this
happens, click [Cancel].
•
Sound output is not supported when you connect the
MD deck to the computer by the supplied USB cable
alone. To output sound from the MD deck to the
speakers of the connected computer, use the
supplied audio connecting cord (a stereo mini-plug
is provided on both ends) or a resistance-free,
equivalent commercially available product to
connect the ANALOG OUT jack on the MD deck
with the analogue input jack on the computer.
MD deck to the computer by the supplied USB cable
alone. To output sound from the MD deck to the
speakers of the connected computer, use the
supplied audio connecting cord (a stereo mini-plug
is provided on both ends) or a resistance-free,
equivalent commercially available product to
connect the ANALOG OUT jack on the MD deck
with the analogue input jack on the computer.
•
Do not disconnect the USB cable while the Net MD
function is on. Be sure to turn off the Net MD
function before disconnecting the USB cable.
function is on. Be sure to turn off the Net MD
function before disconnecting the USB cable.
•
Disconnecting the USB cable is recommended other
than when connecting and operating the MD deck
from your computer.
than when connecting and operating the MD deck
from your computer.
Using the Net MD function
1
Turn on the computer.
2
Press
?/1
to turn on the deck.
The STANDBY indicator turns off.
3
Load an MD into the slot.
4
Press NET MD.
The Net MD function is activated. The NET
MD button lights up and “Net MD” appears
in the display.
MD button lights up and “Net MD” appears
in the display.
5
Start up and operate OpenMG Jukebox
on the computer.
on the computer.
6
Quit OpenMG Jukebox after use.
7
Press NET MD to turn off the Net MD
function.
function.
Notes
•
When the Net MD function is on, only the following
buttons on the MD deck can be operated.
buttons on the MD deck can be operated.
— EJECT A
— NET MD
— ?/1
— NET MD
— ?/1
However, note that these buttons may not function
when the deck is in certain statuses.
when the deck is in certain statuses.
•
When the Net MD function is turned on, the
following functions are cancelled or the settings are
cleared:
following functions are cancelled or the settings are
cleared:
— Repeat Play, Shuffle Play, Programme Play
— Group function
— Sleep Timer
— Auto Space, Auto Pause
— Pitch Control
— Group function
— Sleep Timer
— Auto Space, Auto Pause
— Pitch Control
•
When “Check USB” appears in the display, check
the USB connection of the deck and the computer.
the USB connection of the deck and the computer.
•
You cannot perform editing operations on the
checked out tracks other than “Moving recorded
tracks” on page 30 and “Naming a track or an MD”
on page 30 using this deck.
checked out tracks other than “Moving recorded
tracks” on page 30 and “Naming a track or an MD”
on page 30 using this deck.