Sony MZ-M200 Manual
Preparing a Power
Source
Charge the rechargeable battery before using
it for the first time or when it is depleted.
Operations can be done on the recorder or the
remote while charging.
it for the first time or when it is depleted.
Operations can be done on the recorder or the
remote while charging.
1
Slide and open the battery
compartment lid in the direction of
the arrow.
the arrow.
2
Insert the rechargeable battery.
Insert it starting with the
and
terminal end.
Insert the battery with
the label side facing up.
3
Close the lid.
4
Connect the AC power cord and the
USB cable to the AC power adaptor.
AC power adaptor
USB cable
AC power cord
5
Connect the other end of the USB
cable to the recorder and the AC
power cord to a wall outlet.
power cord to a wall outlet.
To a wall
outlet
Recorder
To the USB cable
connecting jack
6
Confirm that charging has started.
When charging starts,
and the
charging time (“Charging --min left”)
appear at the start of charging. When the
charging time disappears, charging ends
once and the battery becomes sufficiently
charged. A completely depleted battery
takes about one hour to reach this point,
at which time it is approximately 80%
charged. For a 100% charge, an additional
2 hours of charging is needed.
If the charging time indication disappears
after a short time, this means the battery is
sufficiently charged.
appear at the start of charging. When the
charging time disappears, charging ends
once and the battery becomes sufficiently
charged. A completely depleted battery
takes about one hour to reach this point,
at which time it is approximately 80%
charged. For a 100% charge, an additional
2 hours of charging is needed.
If the charging time indication disappears
after a short time, this means the battery is
sufficiently charged.
14
MZ-RH1/MZ-M200.GB.2-669-084-11(1)