Sony MZ-M200 Manual
• You can adjust the recording level during
recording by moving the jog lever.
• Even after recording ends, the recording level
stays the same until it is adjusted again.
Notes
• You cannot adjust the left and right channel levels
separately.
• To adjust the recording level manually when
synchro-recording, do steps 1 to 4 of the
procedure in this section with “SYNC REC” is set
to “Off”. Afterwards, set “SYNC REC” setting to
“On”, and start recording ( page 51).
procedure in this section with “SYNC REC” is set
to “Off”. Afterwards, set “SYNC REC” setting to
“On”, and start recording ( page 51).
Menu for playback
Menu for playback can be set with the remote only.
Items
Options
SpeedCtrl
+100% - –50%,
Changes the playback speed. The normal playback speed can
be varied in 15 steps.
be varied in 15 steps.
To return to normal speed
Set the playback speed to 0 %.
When you set a playback speed other than 0 %,
“SC” appears to the left of the time display in the
display window of the remote.
“SC” appears to the left of the time display in the
display window of the remote.
Notes
• When using Speed Control, you may hear noise or
an echo in the playback.
• The Virtual Surround, 6-Band Equalizer and
Dynamic Normalizer functions are disabled while
Speed Control is being used.
Speed Control is being used.
53
Using the Menu
MZ-RH1/MZ-M200.GB.2-669-084-11(1)