Sony CDX-GT805DX Manual
14
Other functions
Changing the sound settings
Adjusting the sound
characteristics — Balance/Fader/
Sub Woofer
characteristics — Balance/Fader/
Sub Woofer
You can adjust the balance, fader and subwoofer
volume.
volume.
1
Select a source, then press (SOUND)
repeatedly to select the desired item.
The item changes as follows:
repeatedly to select the desired item.
The item changes as follows:
HDEQ
t DSO 3D t I-TA t
Balance (left-right)
t
Fader (rear-front)
t
Sub Woofer (subwoofer volume)*
* “
– ∞” is displayed at the lowest setting, and can
be adjusted up to 20 steps.
2
Rotate the VOL control dial to adjust
the selected item.
After about 3 seconds, the setting is complete
and the display returns to normal play/
reception mode.
the selected item.
After about 3 seconds, the setting is complete
and the display returns to normal play/
reception mode.
With the card remote commander
In step 2, to adjust the selected item, press
In step 2, to adjust the selected item, press
< or ,.
Adjusting menu items — MENU
1
Press (MENU).
2
Rotate the SEEK control dial until the
desired menu item appears, then
press (ENTER).
The items changes as follows:
desired menu item appears, then
press (ENTER).
The items changes as follows:
SETUP
y DISPLAY y RECEIVE
MODE
y SOUND y LIST
3
Rotate the SEEK control dial until
desired setting item appears, then
press (ENTER).
The digital indication moves to the right
(setting selection) side.
desired setting item appears, then
press (ENTER).
The digital indication moves to the right
(setting selection) side.
4
Rotate the SEEK control dial to select
the setting, then press (ENTER).
The setting is complete.
the setting, then press (ENTER).
The setting is complete.
5
Press (MENU).
The display returns to normal play/reception
mode.
The display returns to normal play/reception
mode.
Note
Displayed items will differ, depending on the source
and setting.
Displayed items will differ, depending on the source
and setting.
With the card remote commander
In steps 2 and 3: press
In steps 2 and 3: press
M or m instead of the SEEK
control dial; in steps 2, 3 and 4, press
< or ,
instead of (ENTER).
The following items can be set (follow the page
reference for details):
“
reference for details):
“
z
” indicates the default settings.
SETUP
DISPLAY
Clock Adjust (page 4)
Beep
To set “on” (
z
) or “off.”
RM (Rotary Commander)
To change the operative direction of the rotary
commander controls.
– “REV”: when you mount the rotary
commander controls.
– “REV”: when you mount the rotary
commander on the right side of the steering
column.
column.
– “NORM” (
z
): to use the rotary commander in
the factory-set position.
AUX-Audio*
1
To turn the AUX source display “on” (
z
) or
“off” (page 16).
Auto Image
Auto Image mode automatically steps (every 10
seconds) through the display images.
– “off”: to not change the image automatically.
– “SA”: to step repeatedly through the display
seconds) through the display images.
– “off”: to not change the image automatically.
– “SA”: to step repeatedly through the display
images of Spectrum analyzer mode.
– “Movie”: to step repeatedly through the
display images of Movie mode.
– “All” (
z
): to step repeatedly through the
display images in all display modes.
Information (Display Information)
To display the items (depending on the source,
etc.) at the middle of the display while a image
is displayed.
– “Simple”(
etc.) at the middle of the display while a image
is displayed.
– “Simple”(
z
): to not display any items.
– “All”: to display all items.
– “Clear”: to have items automatically
– “Clear”: to have items automatically
disappear. (Excluding digital indication.)
Demo*
1
(Demonstration)
To set “off” or “on” (
z
).
Dimmer
To change the brightness of the display.
– “Auto” (
– “Auto” (
z
): to dim the display automatically
when you turn lights on.
– “on”: to dim the display.
– “off”: to deactivate the dimmer.
– “off”: to deactivate the dimmer.