Sony CDX-GT616UG User Manual
9
Radio
Storing and receiving
stations
stations
Tuning step setting is required (page 4).
Notes
• If the tuning step setting is changed, the stored
stations will be erased.
• If replacing the car battery or changing the
connections, the tuning step setting will be
erased, and you will need to set again.
erased, and you will need to set again.
Caution
When tuning in stations while driving, use
Best Tuning Memory (BTM) to prevent an
accident.
When tuning in stations while driving, use
Best Tuning Memory (BTM) to prevent an
accident.
Storing automatically — BTM
1
Press
repeatedly until
“TUNER” appears.
To change the band, press
To change the band, press
repeatedly. You can select from FM1,
FM2, FM3, AM1 or AM2.
FM2, FM3, AM1 or AM2.
2
Press and hold the select button.
The setup display appears.
The setup display appears.
3
Rotate the control dial until “BTM”
appears, then press it.
The unit stores stations in order of
frequency on the number buttons.
appears, then press it.
The unit stores stations in order of
frequency on the number buttons.
Storing manually
1
While receiving the station that you
want to store, press and hold a number
button (
want to store, press and hold a number
button (
to ) until “MEM”
appears.
Receiving the stored stations
1
Select the band, then press a number
button (
button (
to ).
Tuning automatically
1
Select the band, then press
+/–
to search for the station.
Scanning stops when the unit receives a
station. Repeat this procedure until the
desired station is received.
Scanning stops when the unit receives a
station. Repeat this procedure until the
desired station is received.
Tip
If you know the frequency of the station you want
to listen to, press and hold
to listen to, press and hold
+/– to locate
the approximate frequency, then press
+/– repeatedly to fine adjust to the
desired frequency (manual tuning).
+/– repeatedly to fine adjust to the
desired frequency (manual tuning).