Sony CDX-RA650 User Manual
11
Other functions
Changing the sound settings
Adjusting the sound
characteristics
characteristics
You can adjust the balance, fader, and subwoofer
volume.
volume.
1
Press (SEL) repeatedly until
“Balance,” “Fader” or “Sub Woofer”
appears.
The item changes as follows:
“Balance,” “Fader” or “Sub Woofer”
appears.
The item changes as follows:
equalizer setting*
1
t
Balance (left-right)
t
Fader (rear-front)
t
Sub Woofer (subwoofer volume)*
2
t
AUX Level*
3
*1 When EQ3 is activated (page 11).
*2 “–
*2 “–
∞” is displayed at the lowest setting, and can
be adjusted up to 20 steps.
*3 When AUX source is activated (page 13).
2
Press the volume control up or down
repeatedly to adjust the selected item.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
repeatedly to adjust the selected item.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
With the card remote commander
In step 2, to adjust the selected item, press
In step 2, to adjust the selected item, press
<, M, ,
or
m.
Customizing the equalizer curve
— EQ3
— EQ3
“Custom” of EQ3 allows you to make your own
equalizer settings.
equalizer settings.
1
Select a source, then press (EQ3)
repeatedly to select “Custom.”
repeatedly to select “Custom.”
2
Press (SEL) repeatedly until “LOW
Center Frequency” appears.
Center Frequency” appears.
3
Press the volume control up or down
repeatedly to select the desired
frequency.
LOW Frequency can be set to 60 Hz or 100
Hz.
repeatedly to select the desired
frequency.
LOW Frequency can be set to 60 Hz or 100
Hz.
4
Press (SEL).
5
Press the volume control up or down
repeatedly to adjust the volume level.
The volume level is adjustable in 1 dB steps,
from –10 dB to +10 dB.
repeatedly to adjust the volume level.
The volume level is adjustable in 1 dB steps,
from –10 dB to +10 dB.
6
Press (SEL).
Repeat steps 3 to 6 to adjust “MID” and
“HIGH.”
MID and HIGH frequencies differ but are set
in the same way (MID: 500 Hz or 1.0 kHz;
HIGH: 10.0 kHz or 12.5 kHz).
Repeat steps 3 to 6 to adjust “MID” and
“HIGH.”
MID and HIGH frequencies differ but are set
in the same way (MID: 500 Hz or 1.0 kHz;
HIGH: 10.0 kHz or 12.5 kHz).
To restore the factory-set equalizer curve,
press and hold (SEL) before the setting is
complete.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
press and hold (SEL) before the setting is
complete.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
Tip
Other equalizer types are also adjustable.
Other equalizer types are also adjustable.
With the card remote commander
In step 3 and 5, to adjust the selected item, press
In step 3 and 5, to adjust the selected item, press
<,
M, , or m.
Adjusting setup items — SET
1
Press and hold (SEL).
The setup display appears.
The setup display appears.
2
Press (SEL) repeatedly until the
desired item appears.
desired item appears.
3
Press the volume control up or down
to select the setting (example “on” or
“off”).
to select the setting (example “on” or
“off”).
4
Press and hold (SEL).
The setup is complete and the display returns
to normal play/reception mode.
The setup is complete and the display returns
to normal play/reception mode.
Note
Displayed items will differ, depending on the source
and setting.
Displayed items will differ, depending on the source
and setting.
With the card remote commander
In step 3, to select the setting, press
In step 3, to select the setting, press
< or ,.
The following items can be set (follow the page
reference for details):
“
reference for details):
“
z
” indicates the default settings.
Clock Adjust (page 4)
CT (Clock Time)
To set “on” or “off” (
z
Beep
To set “on” (
z
) or “off.”
continue to next page
t