Sony MZ-R500DPC Manual
24
-GB
Connecting to a stereo
system
system
Connect the i jack of the recorder to the
LINE IN jacks of an amplifier or a
recorder with a line cable (not supplied).
The output is analog. The recorder plays
the MD digitally and sends analog signals
to the externally connected equipment.
LINE IN jacks of an amplifier or a
recorder with a line cable (not supplied).
The output is analog. The recorder plays
the MD digitally and sends analog signals
to the externally connected equipment.
1
Press N to start playing.
Notes
• Even when connecting to the externally
connected equipment, the Mega Bass function
is operative. If you do not want the effect of
the Mega Bass function on your recording or
the output from the externally connected
equipment, set “BASS” to “OFF” (page 22).
is operative. If you do not want the effect of
the Mega Bass function on your recording or
the output from the externally connected
equipment, set “BASS” to “OFF” (page 22).
• When recording to an externally connected
equipment, press VOL +/– repeatedly to
adjust the volume level until “VOL 27”
appears in the display, which is optimum for
recording to an externally connected
equipment.
adjust the volume level until “VOL 27”
appears in the display, which is optimum for
recording to an externally connected
equipment.
Portable DAT
recorder, etc.
recorder, etc.
Stereo system,
etc.
etc.
to LINE IN
2 phono plugs
L
(white)
(white)
Stereo mini-plug
R (red)
RK-G129
(not supplied)
(not supplied)
to i
RK-G136
(not supplied)
(not supplied)