Sony MZ-N710 User Manual
30
Adding track marks manually
1
While the recorder is recording, press
T MARK (press P MODE/
T MARK (press P MODE/
on the
remote control).
Adding track marks
automatically (Auto Time
Mark)
automatically (Auto Time
Mark)
Use this feature to add track marks
automatically at specified intervals when
recording through the analog input
connector or a microphone. This function
is convenient for recording long period of
time, such as lectures, meetings, etc.
automatically at specified intervals when
recording through the analog input
connector or a microphone. This function
is convenient for recording long period of
time, such as lectures, meetings, etc.
1
While the recorder is recording or in
recording pause, press MENU.
recording pause, press MENU.
2
Press . or > repeatedly “REC
SET” appears in the display, and then
press ENTER.
SET” appears in the display, and then
press ENTER.
3
Press . or > repeatedly “TIME
MARK” appears in the display, and
then press ENTER.
MARK” appears in the display, and
then press ENTER.
“MARK OFF” appears in the display.
4
Press > to show “MARK ON” in
the display, and then press ENTER.
the display, and then press ENTER.
5
Press . or > repeatedly until
the desired time interval appears in
the display, and then press ENTER.
the desired time interval appears in
the display, and then press ENTER.
Pressing . or > changes the
time setting (Time:) by 1 minute,
within the range of 1 to 99 minutes.
time setting (Time:) by 1 minute,
within the range of 1 to 99 minutes.
To cancel Auto Time Mark
Select “MARK OFF” in step 4 or stop
recording.
recording.
Using Auto Time Mark to add
track marks while recording
track marks while recording
When the elapsed recording time
exceeds the time interval for Auto
Time Mark:
exceeds the time interval for Auto
Time Mark:
The recorder adds track marks at the point
you set the time interval and from that
point the recorder adds a track mark
whenever the time interval has elapsed.
you set the time interval and from that
point the recorder adds a track mark
whenever the time interval has elapsed.
Example: Eight minutes of recording has
been completed when the Auto Time
Mark time interval is set to 5 minutes.
A track mark will be added at the 8-
minute point (after the start of recording)
and after each 5-minute interval
thereafter.
been completed when the Auto Time
Mark time interval is set to 5 minutes.
A track mark will be added at the 8-
minute point (after the start of recording)
and after each 5-minute interval
thereafter.
When the time interval set for Auto
Time Mark exceeds the elapsed
recording time:
Time Mark exceeds the elapsed
recording time:
The recorder adds track marks when the
set Auto Time Mark time interval has
elapsed.
set Auto Time Mark time interval has
elapsed.
Example: Three minutes of recording has
been completed when the Auto Time
Mark time interval is set to 5 minutes.
A track mark will be added at the 5-
minute point (after the start of recording)
and after each 5-minute interval
thereafter.
been completed when the Auto Time
Mark time interval is set to 5 minutes.
A track mark will be added at the 5-
minute point (after the start of recording)
and after each 5-minute interval
thereafter.
z
“T” appears after the track display on the
recorder for track marks added by Auto Time
Mark, and “T” appears before the time display
on the remote control.
recorder for track marks added by Auto Time
Mark, and “T” appears before the time display
on the remote control.
Notes
•
If you add a track mark by pressing T MARK
or X (pause), etc., while recording, Auto
Time Mark will begin automatically adding a
track mark each time the selected time interval
has elapsed.
or X (pause), etc., while recording, Auto
Time Mark will begin automatically adding a
track mark each time the selected time interval
has elapsed.
•
The setting will be lost when the recording
stopped.
stopped.