Sony MZ-N710 User Manual
69
While playing
“TR FULL” appears
even before the disc
has reached the
maximum recording
time (60, 74, or 80
minutes) and the
recording cannot be
done.
even before the disc
has reached the
maximum recording
time (60, 74, or 80
minutes) and the
recording cannot be
done.
• This is due to the MiniDisc system limitation. When 254 tracks
have been recorded on the disc, “TR FULL” appears regardless
of the total recorded time. More than 254 tracks cannot be
recorded on the disc.
, To continue recording, erase unnecessary tracks.
of the total recorded time. More than 254 tracks cannot be
recorded on the disc.
, To continue recording, erase unnecessary tracks.
The remaining
recording time does
not increase even
after erasing
numerous short
tracks.
recording time does
not increase even
after erasing
numerous short
tracks.
• This is due to the MiniDisc system limitation. Tracks of under
12 seconds (in SP stereo), 24 seconds (in LP2 stereo mode or
monaural), or 48 seconds (in LP4 stereo mode) in length are not
counted and so erasing them may not lead to an increase in the
recording time.
monaural), or 48 seconds (in LP4 stereo mode) in length are not
counted and so erasing them may not lead to an increase in the
recording time.
Symptom
Cause/Remedy
An MD is not
played normally.
played normally.
• Repeat play is selected.
, Use MENU on the recorder or press P MODE/
on the
remote control to change back to the normal play.
• Playback mode is changed.
, Use MENU on the recorder or press P MODE/
on the
remote control to change back to the normal play.
An MD is not
played from the
first track.
played from the
first track.
• Disc playing stopped before it came to the last track.
, Press N for 2 seconds or more to start playing, or press the
control towards . repeatedly on the remote.
Playback sound
skips.
skips.
• The recorder is placed where it receives continuous vibration.
, Put the recorder on a stable place.
• A very short track may cause sound to skip.
, Try not to create a track under one second long.
Sound has a lot of
static.
static.
• Strong magnetism from a television or such device is interfering
with operation.
, Move the recorder away from the source of strong magnetism.
, Move the recorder away from the source of strong magnetism.
The volume of the
recorded track is
low.
recorded track is
low.
• The track was recorded in analog (When recorded in digital, the
recording level will be automatically adjusted as same as the sound
source), or you used a connecting cord with an attenuator.
, Use a correct connecting cord.
source), or you used a connecting cord with an attenuator.
, Use a correct connecting cord.
• The recording level was low.
, Adjust the recording level manually when recording.
Volume cannot be
turned up.
turned up.
• AVLS is on.
, Release AVLS settings (page 57).
Symptom
Cause/Remedy