Zoom 4360 Quick Setup Guide

 

We’ve included two strips of Velcro, one with 3 pieces of 
light gray Velcro and the other with 3 pieces of white 
Velcro. You use one of each color, and the extras will let 
you replace the Velcro if it starts to wear out. 

 

Velcro Pad

Peel off one piece of gray Velcro and stick it on a clear, 
preferably flat area on the same side of your iPod/MP3 
player as the headphone jack. Remember, the further from 
the jack the better, but it can’t be more than 3.75 cm (1.5 
inches) from the jack. Now peel off one piece of white 
Velcro from the other strip, and carefully push the Velcro 
side (NOT the sticky side) against the gray Velcro that you 
already installed, so that the two pieces stay together. 
Then plug in the Transmitter, being careful that it's straight. 
Press it in place so that it pushes against the sticky side of 
the white Velcro. 
When you first do this, you should leave the Transmitter in 
place for at least one hour before pulling the Transmitter 
and audio device apart. To be safe, we recommend that 
you leave them attached overnight. 

For assistance, please go to www.zoom.com and select 
Technical Support. From here you can register your product, 
contact our technical support experts, use our intelligent 
database SmartFacts™, and/or get warranty information. 
14