Zoom 4360 Quick Setup Guide
Step 1: Charging the Transmitter
Mini-USB Connector
Charging LED
Removable
plastic jacket
plastic jacket
On/Off (1/0) Switch
a Make sure that your computer is NOT set to go into sleep
mode after a period of inactivity. Check the computer's
documentation for instructions.
documentation for instructions.
b Unless you have an iPod Mini, remove the plastic jacket
from the Transmitter.
c With your computer turned on, plug one end of the included
USB charging cable into the mini-USB connector on the
Transmitter, and plug the other end into an available USB
port.
It takes up to 2 hours for the Transmitter to become fully
charged. The LED nearest the bottom of the Transmitter is
red during charging and becomes dim when charging is
complete.
Transmitter, and plug the other end into an available USB
port.
It takes up to 2 hours for the Transmitter to become fully
charged. The LED nearest the bottom of the Transmitter is
red during charging and becomes dim when charging is
complete.
d When the the Transmitter is fully charged, unplug the
charging cable from the Transmitter and the PC.
A fully charged Transmitter works for about
A fully charged Transmitter works for about
6 hours.
e When you are not using the Transmitter, turn the 1/0
(On/Off) switch to 0 (Off) to save the battery.
4