Panasonic RQTV0080-1P User Manual

Page of 24
RQTV0080
5
ENGLISH
English
English
Step 2
Step 2
 - Inserting batteries into the remote control
 - Inserting batteries into the remote control
 Batteries
•  Insert so the poles (+ and –) match those in the remote control.
•  Remove if the remote control is not going to be used for a long period of 
time. Store in a cool, dark place.
•  Do not use rechargeable type batteries.
•  Mishandling of batteries in the remote control can cause electrolyte 
leakage, which may cause a fi re.
Do not:
•  mix old and new batteries;
•  use different types of batteries at the same time;
•  heat or expose to fl ame;
•  take apart or short-circuit;
•  attempt to recharge alkaline or manganese batteries;
•  use batteries if their covering has been peeled off.
 Use
  Aim at the remote control sensor, avoiding obstacles, at a maximum 
range of 7 m (23 feet) directly in front of the unit.
  Refer to page 6 for remote control signal sensor position.
SStep 33
 - DEMO function
 - DEMO function
When the unit is fi rst plugged in, a demonstration of its functions may be 
shown on the display.
If the demo setting is off, you can show a demonstration by selecting 
“DEMO ON”.
Press and hold [
7, -DEMO].
The display changes each time the button is held down.
$%-/
$%-/
While in standby mode, select “DEMO OFF” to reduce power 
consumption.
Placement of speakers
Speakers are designed identically so that no left or right channel orientation is necessary.
Use only the supplied speakers.
The combination of the main unit and speakers provide the best sound. Using other speakers can damage the unit and sound 
quality will be negatively affected.
Note
•  Keep your speakers at least 10 mm (
13
/
32
˝) away from the system for proper ventilation.
•  These speakers do not have magnetic shielding. Do not place them near televisions, personal computers or other devices easily infl uenced 
by magnetism.
•  You cannot take the front net off the speakers.
Caution
•  Use the speakers only with the recommended system. Failure to do so can damage the amplifi er and 
speakers, and can cause fi re. Consult a qualifi ed service person if damage occurs or if a sudden 
change in performance is apparent.
•  Do not attach these speakers to walls or ceilings.
PM23_P_En_Sp.indd   5
PM23_P_En_Sp.indd   5
1/16/06   1:46:41 PM
1/16/06   1:46:41 PM