Panasonic WJ-HD716K/G User Manual

118

Display the [CAM] tab. (☞ Page 114)

Click the [OPEN] button in the [Menu] box.

 →  The setup window will be displayed and the setup 

menu of the camera will be displayed in the image 
display area. 

Operate the setup menu of the camera.
     

To control the camera connected to the recorder, it is necessary in advance to configure the settings of the 
camera function. The settings of the camera function can be configured on the setup menu of the camera. 
It is possible to call the setup menu of the camera from a PC. The contents of the setup menu and the opera-
tion procedures vary depending on the model of the camera. Refer to the operating instructions of the camera 
for further information.
The following are descriptions of how to display the setup menu of the camera and of how to perform the basic 
operation. 
     

To operate the setup menu of the camera, use the fol-
lowing buttons.

Move the cursor

Arrows button (

C

 

D A

 

B

)

Change parameters

Arrows button (

A

 

B

)

Apply the set value or 
move to the lower level 
menu

[SET] button

Move to the higher level 
menu

[SETUP/ESC] button

Display the special 
menu

Click the [Reset] button 
after moving the cursor 
onto [SPECIAL] of the 
setup menu of the camera.

Reset the camera

Click the [Reset all] button 
after moving the cursor 
onto [CAMERA RESET] of 
the setup menu of the cam-
era.

To close the setup menu of the camera, click the 
[Close] button.

 •  When the camera has the refresh function

(REFRESH), it is possible to execute the refresh 
function by clicking the [Reset] button.

 •  The camera setup window may sometimes remain

displayed after the setup menu of the camera is 
closed such as when resetting the camera, etc. In 
this case, click the [Close] button of the camera 
setup window. 

 •  Only users whose user level is allowed to control

cameras or to configure the settings can configure 
the settings of the camera.