Panasonic WJ-HD716K/G User Manual

58

Configure the settings to not to perform the alarm action even when an event occurs.
It is useful to suspend the alarm action for a certain period such as when configuring the settings of the record-
er.
However, recording filing of event logs, preset position function and alarm occurrence indication (on monitor) 
will be performed even though the alarm action is being suspended. 
     

Press the [ALARM RESET] button and the [SET] but-
ton on the front panel simultaneously. 
 →  The alarm action will be suspended. The alarm 

suspension indicator will light. 

To cancel the alarm suspension, press the [ALARM 
RESET] button and the [SET] button simultaneously 
again. 
 →  The alarm suspension will be canceled and the 

alarm suspension indicator will go off. 

     

 •  It is impossible to suspend alarm actions using

the mouse.

 •  It is possible to disable the alarm actions by con-

necting an external switch to the ALARM/
CONTROL connector (pin no. 22: alarm suspen-
sion input terminal) on the rear of the recorder. 
When setting the external switch to "On", the 
alarm action will be suspended. To cancel the 
alarm suspension, set the external switch to "Off".

 
     

When an error (trouble) occurred on the recorder, the recorder will take the error action. To cancel the error 
action, press the [ALARM RESET] button on the front panel or click the error icon on the status bar displayed 
on monitor 2.

 •  Depending on the error type, the error indication by the status indicator on the front panel will not go off

even when canceling the error action.