Panasonic WJ-HD716K/G User Manual

96

Display the top page of the operation window  
(☞ page 77), and then select the camera channel to 
be searched for in the [Cam. select] box. 

Click the [VMD] button in the [Search] box.

 →  The VMD search filter window will be displayed.

Specify the search conditions (filters). 

Set detection area and detection sensitivity 
Up to 4 detection areas (A - D) can be set. Set detec-
tion areas and detection sensitivities for each of them 
as follows. 
     

 1.  Create a detection area by dragging the mouse. 
    Up to 4 areas can be created and they will be area 

A, B, C and D in order or creation. 

 •  To delete the created detection area, check the

check box corresponding to the area to be delet-
ed on the area setup window and then click the 
[Area delete] button.

 
 2.  Set the detection sensitivity of each detection 

area. 

    Click the [

C] button, and then set the detection 

sensitivity for each area (A - D) from the following. 
Off: Does not detect motion in the selected area. 
Low: Low sensitivity 
Mid: Standard sensitivity 
High: High sensitivity 

     

Display a list of time and date when a motion was detected (by the VMD function) from images recorded by all 
the recording modes (☞ page 37), and then select a desired recorded image to play from the list. 
Camera channels, time and date, detection area and detection sensitivity can be used as the filters for the VMD 
search.