Panasonic WJ-ND400 User Manual
Outline of Functions
19
Event operations include the following.
• Start recording images
Recording is done according to the recording duration and rate
settings on the settings menu. The images from a camera before
an event occurs can be recorded and linked to the event (pre-
record event).
settings on the settings menu. The images from a camera before
an event occurs can be recorded and linked to the event (pre-
record event).
• Display alarm messages
A pop-up screen appears to indicate an event has occurred.
• Alarm indicator blinks
Alarm indicator on the front of the recorder blinks.
• Buzzer sounds
The buzzer sounds according to the settings on the settings
menu.
menu.
• The camera goes to its preset position.
The camera moves to a pre-registered preset position.
• Notification email sent when event occurs
Alarm mail (notification of the time and date of an event) is sent to
registered email addresses when an event occurs. An image can
be attached to this email. Up to 4 addresses can be registered to
receive the alarm mail.
registered email addresses when an event occurs. An image can
be attached to this email. Up to 4 addresses can be registered to
receive the alarm mail.
• Alarm signal output from the Alarm/Control connector on the rear
panel of the recorder (Alarm output)
When an event occurs, a signal is output from the Alarm
connector on the rear panel of the recorder to sound an alarm
etc.
connector on the rear panel of the recorder to sound an alarm
etc.
• Event log is recorded.
When an event occurs, the type of event and the time it occurred
are recorded in an event log.
are recorded in an event log.
• Images recorded during events are transmitted to an FTP server.
When an event occurs, images are recorded from when the
event starts for a set period of time and are automatically
transmitted to an FTP server.
event starts for a set period of time and are automatically
transmitted to an FTP server.
• A PC is notified of an alarm according to Panasonic alarm
protocol settings.
When an event or error occurs, a PC is automatically notified
regarding event or error information according to the [Panasonic
alarm protocol] settings. Install the software (option) on the PC
designated to receive and display event or error notification.
regarding event or error information according to the [Panasonic
alarm protocol] settings. Install the software (option) on the PC
designated to receive and display event or error notification.
Refer to the "readme.txt" file on the CD-ROM for details about the
software.
software.
Live Monitoring
Recording
* Order of priority: Images are recorded in the highest priority mode if more than one mode is enabled.
Refer to the Setup Instructions (PDF file) for information about the settings menu list.
List of Functions
Function
Description
1-screen
Live images from cameras (including audio) are displayed on one screen.
The camera can be operated from the recorder when one screen is displayed (refer to the Operating
Instructions (PDF file)).
The camera can be operated from the recorder when one screen is displayed (refer to the Operating
Instructions (PDF file)).
4-screen
Live images from a camera are displayed on multi-screen.
Sequential display
Images from multiple cameras are shown in preset sequence on the screen.
Function
Order of
priority
*
Description
Emergency recording
1
Recording is done when an emergency occurs.
Event post recording
2
Recording is automatically done after various events occur.
Manual recording
3
Recording of images and audio can be started and stopped manually.
Schedule recording
4
Recording is done automatically during a set time period.
Pre-event recording
5
Recording is automatically done before various events occur.
Setup Menu List
chap2.fm 19 ページ ２００８年４月８日 火曜日 午後５時２０分