Panasonic WJ-ND400 User Manual
22
Installation and Setup
Getting Started
The procedure to start operations is shown below.
Setup Procedure
1
Rack Mounting
Mount the recorder into the rack (page 23).
Go to step 2 if you are not using a rack.
Go to step 2 if you are not using a rack.
2
Connections
Connect the recorder to the various devices (page 25).
3
Power On
Turn on the recorder (page 39).
When using extension units, turn on all extension units before turning on
the recorder.
When using extension units, turn on all extension units before turning on
the recorder.
4
Installing HDDs
Install the HDDs in the recorder (page 46).
Unformatted HDDs inserted into the recorder are automatically initialized.
Also, set the HDD operation mode as necessary (page 51).
Unformatted HDDs inserted into the recorder are automatically initialized.
Also, set the HDD operation mode as necessary (page 51).
5
Recorder Network Settings
Use the buttons on the recorder's front panel to do the network settings
(refer to the Setup Instructions (PDF file)).
(refer to the Setup Instructions (PDF file)).
6
PC Network Settings
Change the PC's network settings to match the recorder's settings (refer to
the Setup Instructions (PDF file)).
the Setup Instructions (PDF file)).
7
Initialize HDDs
To change HDD space management, display disk configuration and
initialize the HDD from the settings menu on the recorder as needed (refer
to the Setup Instructions (PDF file)).
initialize the HDD from the settings menu on the recorder as needed (refer
to the Setup Instructions (PDF file)).
8
Camera Network Settings
Open the PC settings menu from the PC and do the network settings (refer
to the Setup Instructions (PDF file)).
to the Setup Instructions (PDF file)).
9
Setup
Set up the functions that you need (refer to the Setup Instructions (PDF
file)).
file)).
10
Start Operations
When necessary
Replace HDDs
You can change or format HDDs while the recorder is [On].
ND400_Basic.book 22 ページ ２００８年４月８日 火曜日 午後３時５９分