Panasonic WJ-ND400 User Manual
39
Power Supply
Turn on the recorder.
1
Insert the power plug to an outlet.
120 V AC, 60 Hz for NTSC model
220 V - 240 V AC, 50 Hz for PAL model
120 V AC, 60 Hz for NTSC model
220 V - 240 V AC, 50 Hz for PAL model
• Make sure the power source matches the power
requirement of the model in use.
2
Turn on the [POWER] switch on the rear of the recorder.
•
The operate indicator lights and recorder/HDD check
(system check) begins.
(system check) begins.
•
During system check, [WJ-ND400] appears on the LCD.
Also, [Don't turn off] is displayed, followed by [System
Checking].
Also, [Don't turn off] is displayed, followed by [System
Checking].
•
The Time display format screen appears when the system
check is complete (page 40).
check is complete (page 40).
Turn off the recorder.
1
Set [Basic] - [Basic] - [Recording] on the settings menu
to [Off] and stop all recording (refer to the Setup
Instructions (PDF file)).
to [Off] and stop all recording (refer to the Setup
Instructions (PDF file)).
2
Turn off the [POWER] switch on the rear of the recorder
after checking that the HDD indicators are off.
The operate indicator goes off.
after checking that the HDD indicators are off.
The operate indicator goes off.
Note:
•
Do not forget to start recording when you turn on the power.
1
Click the [STOP] button on the [HDD] tab to stop
playback (refer to the Operating Instructions (PDF file)).
playback (refer to the Operating Instructions (PDF file)).
2
Turn off the [POWER] switch on the rear of the recorder
after checking that the HDD indicators are off.
The operate indicator goes off.
after checking that the HDD indicators are off.
The operate indicator goes off.
Turning On the Power
Important:
•
When using extension units (WJ-HDE400), turn on all
extension units before turning on the recorder.
extension units before turning on the recorder.
Turning Off the Power
Important:
•
When the recorder is not in use for an extended period of
time, unplug the power plug.
time, unplug the power plug.
•
Be sure to turn the power on and operate once a week to
check recording and playback functionality.
check recording and playback functionality.
During Recording
During Playback
ND400_Basic.book 39 ページ 2008年4月8日 火曜日 午後3時59分