Panasonic WJ-HD716K User Manual

100

[IP address]
When "Off" is selected for "DHCP", enter an IP address. 
Enter 4 units from the decimal numbers (0-255). 
Default: 192.168.0.250

[Subnet mask]
Enter a subnet mask according to the network environment 
when "Off" is selected for "DHCP". Enter 4 units from the 
decimal numbers (0-255). 
Default: 255.255.255.0

[Default gateway]
Enter the IP address of the gateway according to the net-
work environment when "Off" is selected for "DHCP". Enter 
4 units from the decimal numbers (0-255). 
Default: 192.168.0.1

[Line speed]
Specify the line speed for data transmission. 

Auto: Line speed will be applied automatically. 
10M-Half: 10 Mbps half-duplex
10M-Full: 10 Mbps full-duplex
100M-Half: 100 Mbps half-duplex
100M-Full: 100 Mbps full-duplex

Default: Auto

■

The setting for the maintenance port behind the front cover 
of the recorder is configured. 
This setting is required to maintain and support the recorder 
from a PC connected via a network using the maintenance 
port. 

[IP address]
When "Off" is selected for "DHCP", enter an IP address. 
Enter 4 units from the decimal numbers (0-255).
Default: 192.168.2.250

[Subnet mask]
Enter a subnet mask according to the network environment 
when "Off" is selected for "DHCP". Enter 4 units from the 
decimal numbers (0-255). 
Default: 255.255.255.0

 •  The settings of "Network Port" and "Maintenance Port"

should be on a different subnet.

[Line speed]
Displays the line speed for data transmission. 
It is impossible to change the setting value.