Panasonic WJ-HD616K User Manual
67
Step 1
Move the camera direction to a position to be regis-
tered as a preset position.
tered as a preset position.
Step 2
Display the [Pan/Tilt] tab of the camera control panel
(☞ page 65)
(☞ page 65)
Step 3
Press the [SET] button on the front panel.
→ The "Preset/Auto" window will be displayed.
→ The "Preset/Auto" window will be displayed.
Step 4
Enter a preset position number to be registered.
To enter the preset position number, press the camera
selection button (1 - 0/10) or rotate the jog dial
(inside).
To enter the preset position number, press the camera
selection button (1 - 0/10) or rotate the jog dial
(inside).
Step 5
Move the cursor onto the [Regist] button, and then
press the [SET] button.
→ The confirmation window will be displayed. When
press the [SET] button.
→ The confirmation window will be displayed. When
the [OK] button on the confirmation window is
selected, the "Preset/Auto" window will close and
the camera direction checked by the images cur-
rently being displayed will be registered as a pre-
set position.
selected, the "Preset/Auto" window will close and
the camera direction checked by the images cur-
rently being displayed will be registered as a pre-
set position.
Preset position function
Move the camera to the preset position registered in advance. It is necessary in advance to register preset posi-
tions to perform the preset position function.
tions to perform the preset position function.
Registration of preset positions
Register the preset positions for the camera. Up to 256 preset positions can be registered. The maximum num-
ber of preset position registration varies depending on the model of the camera.
ber of preset position registration varies depending on the model of the camera.
Note:
• Only users whose user level is allowed to control cameras or to configure the settings can register the pre-
set positions.