Panasonic C9700U User Manual

54

55

%] [$] (Select)

"] [#]  

(Select)

[SEL] (Select)

This function enables the user to rewrite the unit’s
graphic pattern, still picture or opening or closing 
moving picture into a desired replacement image.

≥ Data downloaded from Panasonic’s dedicated 

web site

≥ Data generated by a PC
The rewriting process is performed using a CD-R/RW disc 
on which the replacement data is recorded.
The replacement data and the application (IMAGE 
STUDIO) for creating the replacement data using a PC can 
be downloaded from the following web site:
http://panasonic.co.jp/pas/en/software/customize/
index.html

Preparation:
≥ Have ready the CD-R/RW* disc on which the 

replacement data is recorded.

  * A dedicated writing software and a drive 

are needed to create the CD-R/RW disc.
For further details, refer to Panasonic’s web site 
(page 55) or the operating instructions of the 
writing software.

Note:
≥ Do not write data on the CD-R/RW disc if, by 

so doing, the maximum allowed number of fi les 
listed below will be exceeded. If fi les are written 
on the CD-R/RW disc in a number which exceeds 
the maximum number of fi les allowed as given in 
the table below, it will not be possible to use the 
excess fi les.

 Extension Max. number of      

Moving image

.pfm

10

Still image

.pfs

15

Opening image .pfo

5

Closing image

.pfe

5

≥ Do not write any data except data for customizing 

on the CD-R/RW disc.

≥ Do not change the fi le extension since doing so 

will make it impossible for the image to be written 
properly.

≥ When data is to be recorded on the CD-R/RW 

disc, be absolutely sure to record it in the root 
directory (the highest hierarchical level). Do not 
write the data in a folder.

≥ When a CD-RW disc has been inserted into the unit, 

it may take a few moments for its data to be loaded.

≥ GRAPHIC PATTERN A and STILL IMAGE No.1 

cannot be overwritten.

≥ The bigger the fi le, the longer customizing will take 

(approx. 8 minutes for the largest fi le with 751 KB).

≥ When the power is turned off, when the engine 

is stopped or when the panel is released while 
customizing is underway, the customizing 
operation will be aborted and the data being 
rewritten will be lost.  In a case like this, proceed 
with the customizing operation again.

≥ If the corrupted data is selected,  “DISPLAY FILE 

INCOMPLETE” appears.

≥ Do not perform any operations while customizing 

is in progress (step 

7

-

2

).

≥ To return to the default image, download the 

applicable fi le on the web site (page 54) and, 
using the CD-R/RW disc containing this fi le, 
perform the rewriting process again.

≥ The download service may be temporarily shut 

down without warning due to unspecifi ed reasons.  
Furthermore, it may not always be available in all 
areas.

≥ For further details, refer to Panasonic’s web site 

at the address provided below.

 http://www.panasonic.co.jp/global/

(Example: GRAPHIC PATTERN)

The screen showing what will 

be overwritten is previewed.

≥ Customizing is completed successfully, 

and operation returns to step 

4

.

≥ Operation also returns to step 

4

 when 

“No” is selected.

≥ In case of customization failure, 

Customize menu screen

        

∫ GRAPHIC PATTERN

∫ STILL IMAGE

∫ OPENING MESSAGE

∫ CLOSING MESSAGE

VOL

6

5

#

"] [#] 

%] [$] 

(Select)

[BAND] 
(SET)

Returns to step 

5

.

Press and hold [SEL] for more than 
4 seconds to enter the customize menu.

2

(Make sure there is no CD insert in the unit.)
Press [SOURCE] to select the CD mode.

1

Insert the CD-R/RW disc containing the data 
to be used for customizing.
≥ The customize menu screen now appears.

3

1

 Press [

"] or [#] to select an item to be 

customized.

4

Moving image data

Still image data

Moving image at power on

Moving image at power off

2

 Press [SET].

1

 Press [

"] or [#] to select a fi le.

 

≥  The maximum number of characters 

displayed for fi lenames is 16. (The 
number of characters in the fi le name 
may be limited, depending on the type of 
writing software being used.)

2

 Press [SET].

 

≥  The previous screen is restored when 

BACK is selected using [

$] and [SET] is 

pressed to enter the selection.

5

1

  For a moving image fi le or still image fi le, 

press [

%] or [$] to select where to save 

the fi le.

6

2

 Press [SET].

1

 Press [

%] or [$] to select “YES”.

7

2

 Press [SET].

  New data overwrites existing data.

1

  Press and hold [SEL] for more than 

4 seconds to exit the customize menu.

 

≥  The customize mode is released, and 

the CD mode is restored.

2

 Eject the disc.

8