Panasonic WJ-HD309A User Manual

Page of 182
114
■ [Event] Function for Events
Perform the settings for event actions of each event type
(motion detection, video loss, command alarm and terminal
alarm).
● [Event Setup] Settings for the alarm output
duration and the buzzer duration
Perform the settings for the alarm output duration and the
buzzer sound duration for each event type (motion detec-
tion, video loss, terminal/command alarm).
The following are available for the alarm output duration.
When OFF is selected, the alarm output will not be sup-
plied.
(s: second, m: minute)
OFF: No alarm output is supplied.
1 s - 30 s (in 1 second intervals)/40 s/50 s/1 min/2 min/
3 min/4 min/5 min
EXT: 
Alarm output will continue until the ALARM RESET
button is pressed.
Important:
The alarm output duration cannot be set for video loss.
Signals will be supplied continuously from the camera
error output terminal (pin no. 17) of the ALARM/CON-
TROL connector on the rear panel during the period
when the video signal is lost. (Refer to page 86.)
The following are available for the buzzer sound duration.
When OFF is selected, a buzzer will not sound.
(s: second, m: minute)
OFF: The buzzer will not sound.
1 s - 30 s (in 1 second intervals)
/40 s/50 s/1 min/2 min/3 min/4 min/5 min
EXT: 
The buzzer will continue until the ALARM RESET but-
ton is pressed.
● [VMD Setup] Perform the settings for the
motion detection function
Select ON or OFF to determine whether to enable or dis-
able the motion detection function for each camera chan-
nel.
When ON is selected, perform the settings for the motion
detection area for each camera channel. Up to 4 areas can
be set for a camera channel for the detection area. Refer to
page 114 for further information about the motion detection
function.
[Screenshot 1]
Start operation from the camera channel selection menu of
the "VMD Setup" window.
z Rotate the jog dial to select ON for a desired camera
channel for which the motion detection function is to be
applied, and press the SET button.
Event
Schedule
Maintenance
Display
Comm
Switcher
SETUP MENU
LIVE
System
Recording
Event Setup
VMD Setup
Alarm Setup
Terminal Setup
Quick Menu
SETUP
SETUP
SETUP
■ 
VMD
■ 
Video Loss 
■ 
Terminal/Command Alarm 
Advanced
Event
Schedule
Maintenance
Display
Comm
Switcher
SETUP MENU
LIVE
System
Recording
Event Setup
VMD Setup
Alarm Setup
Terminal Setup
Quick Menu
SETUP
SETUP
SETUP
■ 
VMD
■ 
Video Loss 
■ 
Terminal/Command Alarm 
Advanced
Event
Schedule
Maintenance
Display
Comm
Switcher
SETUP MENU
LIVE
System
Recording
Event Setup
VMD Setup
Alarm Setup
Terminal Setup
Quick Menu
SETUP
SETUP
SETUP
■ 
VMD
■ 
Video Loss Setup
■ 
Terminal/Command Alarm Setup
■ 
Alarm Output
■ 
Buzzer
O K
CANCEL
1 0 s
1 0 s
Advanced
Event
Schedule
Maintenance
Display
Comm
Switcher
SETUP MENU
LIVE
System
Recording
Event Setup
VMD Setup
Alarm Setup
Terminal Setup
Quick Menu
ON
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
■ 
CAM1
■ 
CAM2
■ 
CAM3
■ 
CAM4
■ 
CAM5
■ 
CAM6
■ 
CAM7
■ 
CAM8
■ 
CAM9
■ 
CAM10
■ 
CAM11
■ 
CAM12
■ 
CAM13
■ 
CAM14
■ 
CAM15
■ 
CAM16
Advanced
Event
Schedule
Maintenance
Display
Comm
Switcher
SETUP MENU
LIVE
System
Recording
Event Setup
VMD Setup
Alarm Setup
Terminal Setup
Quick Menu
ON
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
■ 
CAM1
■ 
CAM2
■ 
CAM3
■ 
CAM4
■ 
CAM5
■ 
CAM6
■ 
CAM7
■ 
CAM8
■ 
CAM9
■ 
CAM10
■ 
CAM11
■ 
CAM12
■ 
CAM13
■ 
CAM14
■ 
CAM15
■ 
CAM16
Advanced