Panasonic WJ-HD309A User Manual

119

Perform the settings for the recording schedules of record-
ing and event action by designating a day of the week and
time.
A day can be divided into up to 6 time zones, and record-
ing programs and event action programs can be assigned
to each time zone to create a recording schedule.
Up to 4 normal recording programs (REC Program) and up
to 4 event action programs (Event Program) can be creat-
ed. Perform the settings for the REC Program: resolution
and recording rate. Perform the settings for the Event
Program: action mode for each event type and auto copy.
It is possible to create special days apart from the normal
schedule, and a recording program of another day of the
week can be switched to a special day’s program automati-
cally.

Follow the procedures below to create schedules.

Create REC Program/Event Program. 

(aPage 119 and 120)

Create a timetable. (aPage 121)

Assign REC Program/Event Program to a timetable.

(aPage 121)

● [REC Program] Create a recording program 

Perform the settings of resolution, and the settings of
recording rate and image quality for each camera channel.
Up to 4 recording programs can be created.

8 Resolution

FRAME 3D ON: High resolution (720 x 480) with the motion

blur compensation

FRAME 3D OFF: High resolution (720 x 480)
FIELD: Standard resolution (720 x 240)
SIF: Low resolution (360 x 240)

Note: When "FRAME 3D ON" is selected, it is possible to

record a moving object with less blurring. However,
fuzzy images may sometimes be displayed. 

• In the following cases, recording will not be performed

for around 4 seconds:

• When resolution is switched such as when a differ-

ent resolution is set depending on different time
zones

• When the SETUP MENU is closed after changing

the settings

8 Recording Rate and Image Quality for Each

Perform the settings for recording rate, image quality and
recording duration for each camera channel (The settings
for recording duration can be performed only for pre-event
recording and post-event recording.).
OFF/0.1 ips/0.2 ips/0.3 ips/0.4 ips/0.5 ips/1 ips/2 ips/
3 ips/5 ips/6 ips/7.5 ips/10 ips/15 ips/30 ips/60 ips

• When the total of the recording rate of camera channels

1 - 16 is set to the maximum (60 ips when FIELD is
selected, 120 ips when SIF is selected), the recording
rate of two of the camera channels to which the lowest
and the second lowest recording rates are set will be
lower than the set recording rate. (When the lowest
recording rate is applied to three of the camera chan-
nels, this may happen to two of the three channels.)

• The maximum rate for each camera channel differs

depending on the resolution as follows.
FRAME 3D ON/FRAME 3D OFF: 30 ips
FIELD: 60 ips
SIF: 30 ips

• The total of the recording rates of camera channels

must be as follows. 
FRAME 3D ON/FRAME 3D OFF: 30 ips or less
FIELD: 60 ips or less
SIF: 120 ips or less

When the total recording rate becomes more than the
above values, the sections displaying the maximum record-
ing rates for each camera channel will turn red, and it will
be impossible to close the recording program window. In
this case, lower the recording rate that has turned red to a
value less than the above values.

The following are available for the image quality.
SFA/SFB: Top quality (SUPER FINE)
FQA/FQB: High quality (FINE)
NQA/NQB: Standard quality (NORMAL)
EXA/EXB: Low quality (EXTENDED)
**A is suitable for less dynamic images.
**B is suitable for more dynamic images.

The following are available for the recording duration (only
for event pre-recording and event post-recording).
1 s - 10 s (in 1 second intervals)
20 s/30 s/1 - 10 min (in 1 minute intervals)
20 - 60 min (in 10 minutes intervals) 

■ [Schedule] Settings for the recording/event action schedule

■ 

■ 

■