Panasonic WJ-HD309A User Manual

■ On Monitor 2 (To display live or

recorded images)

The negative circled number

q indicates the camera title

default position.

Notes:

• The same images displayed on monitor 2 will be dis-

played on the VGA monitor.

• The camera title will be displayed with 16 characters (2

lines: 8 characters per line).

• When monitor 2 is selected, it is possible to switch the

way of displaying the camera title in the following order
by pressing the camera selection button 8 for the WJ-
HD316A (the camera selection button 6 for the WJ-
HD309A) while the shift function is on (by pressing the
SHIFT button):
Display the camera title

→ Display the camera title in

list form

→ Not display the camera title

• When playing images recorded after selecting "ON" for

"Embedded REC (Time & Date)", the embedded abbre-
viation of the recording mode (event recording/emer-
gency recording) will be displayed.
The abbreviations are as follows:
EVT: Pre-/post-event recording
EMR: Emergency recording

• In case that "ON" is selected for "Embedded REC (Title)"

and also "R-UPPER" or "R-LOWER" is selected for the
camera title position, when playing images recorded
with the resolution setting "SIF", a part of the embedded
camera title may not be displayed.

Important:

• Since the VGA output from this unit is the same as for

televisions (720 H x 480 V pixels/vertical frequency of
59.94 Hz), it may be possible that both the left and right
edges can not fit onto the screen depending on the
VGA monitor.

• It is impossible to use the MONITOR (VGA) connector

when connecting the unit in the cascade connection.

• It may take time to display live images on the VGA mon-

itor if the VGA monitor is turned on/off when the unit is
running.

1. Camera Title

Displays the edited camera title.
A position to display the camera title can be selected
from the following.
Upper left, upper right, lower left, lower right, center
The default camera title position is upper right (R-
UPPER).

2. Task Bar

Displays the current status.
The task bar consists of the main bar (w - A), the left
bar (w - B), and the right bar (w - C).
There are 3 different ways to display the task bar as fol-
lows.

Mode 1
Displays only the main bar and the status is displayed
on it.

Mode 2
Displays the status on the main bar, the left bar and the
right bar.

Mode 3
Displays the status only on the main bar, and does not
display information on the left bar and the right bar.
Note: Mode 2 and Mode 3 are graphic operated. They

may not be as clear as Mode 1.

w – A

–