Philips CDR796 User Manual
4-1
DISMANTLING INSTRUCTIONS
Dismantling the
Top Cover
picture 2
• Remove 7 (9) screws as shown in picture 2.
• Raise top cover at the rear and pull it backwards.
• Raise top cover at the rear and pull it backwards.
remark: in some production batches the top cover
may be fixed with 5 screws at the rear side.
Dismantling the
Tray Covers
To dismantle the ornamental cover, the tray has to be moved out first.
This can either be done by activating the Open/Close-key or manually.
In order to avoid unnecessary loading it is recommended to move the tray out manually a few centimetres.
To release the tray manually proceed as shown in pictures 3, 4, 5 and 6. The tray will move out a little.
Afterwards it can be pulled out as far as convenient.
This can either be done by activating the Open/Close-key or manually.
In order to avoid unnecessary loading it is recommended to move the tray out manually a few centimetres.
To release the tray manually proceed as shown in pictures 3, 4, 5 and 6. The tray will move out a little.
Afterwards it can be pulled out as far as convenient.
Release tray of CD Loader
Release tray of CDR module
picture 4
picture 5
detail
picture 3
picture 6
or
use a short screwdriver
or a paper clip
or a paper clip