Philips CDR820/17 User Manual

Page of 30
Selecting the recording speed
1
Press SPEED several times to select the required recording
speed: 1x (normal speed), 2x (double speed) or 4x (4 times
normal speed).
Notes:
If recording is not successfull, you may need to select a lower
speed.
The recording speed cannot be changed during recording.
Recording a single track
Recording a single track during playback
1
Make sure the CDR(W) is absolutely free of scratches and
dust particles and insert it into the CD recorder tray.
2
Play your desired track on the CD changer.
3
Press RECORD on the set to enter the recording menu.
➜ 
Rec Tr and the tracknumber are displayed.
4
Press either:
YES to start recording,
➜  
The arrow lights,
RECORD IN PROGRESS
is shown,
playback and recording start from the beginning of the
selected track and the actual recording time left starts to
count down.
or
NO to continue playback.
Do not forget to finalize!
Recording an entire CD
High speed recording and automatic finalizing of
the current disc
1
Make sure the CDR(W) is absolutely free of scratches and
dust particles and insert it into the CD recorder tray.
2
Select the required disc by pressing CD1, CD2 or CD3.
3
Press COPY CD to enter into the record mode.
➜ 
The arrow and the YES key start blinking.The remaining
recording time of the CDR(W), the total playing time of
the source CD and Record CD1 (or 2, 3) ? are
displayed.
4
Press YES to start recording and finalizing.
➜ 
The arrow lights,
RECORD IN PROGRESS
and 
FINALIZE
are shown, high speed recording and finalizing start and
the actual recording time left starts to count down.
Note: If a program was already available before pressing
COPY CD, this will be ignored.
PROGRAM
goes off and the
current disc will be recorded. After finishing the recording,
PROGRAM
is shown and the program is available again.
Do not forget to finalize!
Internal recording
21
English
xp CDR 820/17 eng.   30-08-2001 10:43  Pagina 21