Philips CDR775/777 User Manual

• You can program up to 99 tracks to play in any desired

sequence.

• Tracks can be programmed more than once, but each time

counts as a track. (

)

• A program for playback can be made from both the disc in

the recorder deck and the disc in the player deck. A program
for recording can only be made from the disc in the player
deck.

1 Select Changer mode or DJ mode using the DJ MODE key.

➜

CHANGER or DJ MODE appears on the display.

2 Press CDR or CD to select the required deck.

➜ Selected key lights up.

3 Press PROG(ram) to enter Program mode.

➜

flashes and 

PROGRAM followed by track

information appears on the display.

4 Select the required track numbers by turning the EASY

JOG/ENTER key left or right and store by pressing ENTER.

or:

Key in a track number with the number keys on the remote
control and press ENTER to confirm. For 2-digit numbers,
press the keys in rapid succession.
➜ The track will be stored in the program.

➜ The track number, total program time and the number of

programmed tracks (

) are displayed.

5 Repeat step 4 for all tracks to be programmed.

6 Press STOP or PROG(ram) to end programming.

➜

lights continuously.

7 Press PLAY/PAUSE 2 ; to start programmed play.

1 Press REC TYPE to select the required recording mode (see

‘Recording’).

2 Compile your programme as described in “programming for

playback”. (steps 3 to 5)

• Only tracks from the disc in the CD player can be stored.

3 Press RECORD to start recording.

Note:
- To review the program, press PROG(ram), followed by 5 or

6 with the CD player or CD recorder in stop mode.

- To add more tracks to the program, repeat steps 1 to 7.
- If you try to store more than 99 tracks, 

PROG FULL

appears on the display.

1 Press STOP 9 if necessary to stop programmed play.

2 Press STOP 9 again to clear the program.

➜

disappears from the display.

• The program is also cleared if you open the disc tray.

1 In Stop mode press PROG(ram) to enter Program mode.

2 Use 5 or 6 to select the track that has to be deleted.

➜ The track number and program step will be shown on

the display.

3 Press CANCEL/DELETE to erase the track from the program.

➜ The remaining program steps and the remaining playing

time of the program will be displayed.

4 Repeat step 2 and 3 for all tracks to be erased.

5 Press STOP 9 or PROG(ram) to end erasing.

➜

lights continuosly.

REM

TRACK

REC

TIME

DIGITAL

OPTICAL
ANALOG

PROG

SHUFFLE
REPEAT
SCAN

I

I

CD

RW

REM

TOTAL

ALL

TRACK

TIME

STEP

TRACK

CD

RW

2

7

8

11

REM

TRACK

REC

TIME

DIGITAL

OPTICAL
ANALOG

PROG

SHUFFLE
REPEAT
SCAN

I

I

CD

RW

REM

TOTAL

ALL

TRACK

TIME

STEP

TRACK

CD

RW

1

REM

TRACK

REC

TIME

DIGITAL

OPTICAL
ANALOG

PROG

SHUFFLE
REPEAT
SCAN

I

I

CD

RW

REM

TOTAL

ALL

TRACK

TIME

STEP

TRACK

CD

RW

1

2

3

4

5

6

7

8

9 10 11

26