Philips AZ5150 User Manual

16

1. Set the source selector to TAPE/

.

2. Press STOP•OPEN 

9 / to open the cassette holder.

3. Insert a recorded cassette.
4. Press PLAY

1 and playback will start.

– The POWER indicator lights up.

5. Adjust the sound using the VOLUME and DBB controls.
6. For brief interruptions, press PAUSE

;. Press PAUSE ; again to

resume playback.

7. By pressing 

5 or 6,fast winding of the tape is possible in both

directions.

8. To stop playback, press STOP•OPEN 

9 /

™ The keys are automatically released at the end of the tape.

9. Set the source selector to TAPE/

position (with the 

cassette keys are released) to switch off the set.
– The POWER indicator goes out.

• Recording is permissible insofar as copyright or other rights 

of third parties are not infringed.

• This deck is not suitable for recording on CHROME (IEC 

II) 

or METAL (IEC IV) type cassettes. For recording you should 
use NORMAL type cassettes (IEC I) on which the tabs have 
not been broken.

• Check and tighten slack tape before use with a pencil, to 

aviod jamming the deck machanism.

• The recording level is set automatically. Altering the VOLUME

and DBB controls will not affect the recording in progress.

• No recording will take place during the 7 seconds, when the

leader tape passes the recorder heads.

• To prevent the accidental erasure of a recording, keep the

cassette side to be safeguarded in front of you and break out 
the left tab. Recording on this side is no longer possible.

AZ 5150  

page

16

AZ5150/01 eng  02/20/02 16:53  Page 16