Philips CDR951 User Manual

13

1 Plug the power cord supplied into the MAINS connector on

the CD recorder, then into a mains socket.

2 Press ON/OFF.

➜ The recorder is now in Standby mode.

3 Press any key to activate the recorder.

Note:
- The CD recorder will automatically adjust to the local mains

voltage.

- When the CD recorder is in the Standby mode, it is still

consuming some power. If you wish to disconnect your
recorder completely from the mains, press ON/OFF on the
recorder front.

- Place the CD recorder on a solid, vibration free surface.
- Do not place the CD recorder near a source of heat or in

direct sunlight.

- Do not use the CD recorder under extremely damp

conditions.

- If the CD recorder is placed in a cabinet, make sure that a

2.5 cm space remains free on all sides of the CD
recorder/player for proper ventilation.

1 Open the battery compartment cover.

2 Insert 2 batteries (“AA”, LR-6 or UM-3; as supplied) as

shown.

3 Replace the cover.

Note: We recommend you use 2 batteries of the same type

and condition.