Philips 765 User Manual
15
Note:
A
AU
UT
TO
O T
TR
RA
AC
CK
K
works only with Consumer Sources with
a digital output signal according to the IEC 958
(consumer part) audio standard.
(consumer part) audio standard.
Start digital recording
1 With the recorder stopped, press RECORD to enter the
Record standby mode.
‹
‹
RECORD
flashes.
• If
DIG
also flashes, the digital connection is incorrect.
2 To start recording, press PLAY on the CD Recorder/Player
and immediately start the source (from the stop mode).
‹
‹
RECORD
lights continuously. The track number and
recording time used will be indicated on the display.
•• To record a three-second pause (silence) at the beginning
of a track, press PAUSE on the CD Recorder/Player.
• To check the (remaining) recording time, press DISPLAY.
(This can also be done during the recording.)
33 To stop recording, press STOP on the CD Recorder/Player.
‹
RECORD
will go out.
• To interrupt recording, press PAUSE.
‹
RECORD
starts to flash. Resume at step 2.
After recording the display will show
UPDATE for several
seconds.
Note: With
AUTO TRACK
on, the recorder will stop
automatically. Recordings from DAT or DCC will
stop after 20 seconds silence. With
stop after 20 seconds silence. With
AUTO TRACK
off,
the
AUTO STOP
mode is disabled.
Preparing for synchronized digital recording
The CD-SYNC feature enables you to make fast and easy
digital recording of a CD. Track increments are automatically
detected from the digital source material. Track increments
cannot be added manually.
digital recording of a CD. Track increments are automatically
detected from the digital source material. Track increments
cannot be added manually.
1 Make sure the disc is absolutely free of scratches and dust
particles.
2 Press SOURCE repeatedly until (depending on the
connection used):
‹
‹
DIG
DIGITAL or
DIG
OPTICAL will appear on
the display.
• If necessary, press DUAL to switch off the
D
DU
UA
ALL
mode;
D
DU
UA
ALL
will no longer appear on the display.
Start synchronized digital recording
1 With the CD Recorder/Player stopped, press CD-SYNC.
‹
On the display,
CD
-
SYNC
&
SYNC appear. After a time,
RECORD
starts to flash.
• If
DIG
also flashes, the digital connection is incorrect.
2 To start recording, press PLAY on the external digital
source.
‹
‹
The CD Recorder/Player automatically starts to record
and
and
RECORD
lights continuously. The track number and
recording time used will be indicated on the display
• If you start the source during a track, CD-SYNC will not
start recording until the beginning of the next track.
CD SYNC
SRC
SHUFFLE
SHUFFLE
SCAN
RECORD
FINALIZE
ERASE
DUAL
TIME
TRACK
OVER
TOTAL REM
TIME
REPEAT 1
REPEAT 1
DIG
DUBB 1
TOTAL
PAUSE
PAUSE
PROG
PROG
OPT
ANALOG
REM TRACK
AUTO TRACK
TRACK
TRACK
CD SYNC
SRC
SHUFFLE
SHUFFLE
SCAN
RECORD
FINALIZE
ERASE
DUAL
TIME
TRACK
OVER
TOTAL REM
TIME
DUBB 1
TOTAL REM TRACK
AUTO TRACK
TRACK
TRACK
DISPLA
Y
SOURCE
REC LEVEL
DUAL
DISPLA
Y
PHONES
OPEN
CLOSE
C O M P A
C T D I S
C R E C O
R D E R C
D R 7 6 5
CD-SYNC
DUBB
AUTO/
M
CD SYNC
SCAN
REWRITABLE
RECORD
CD
TIME
TRACK
OVER
TOTAL REM
TIME
REPEAT 1
REPEAT 1
DIG
DUBB 1
TOTAL
PAUSE
PAUSE
REM
TRACK
Synchronized digital recording from an
external CD player - CD-SYNC
CD SYNC
SRC
SHUFFLE
SHUFFLE
SCAN
RECORD
ERASE
DUAL
TIME
TRACK
OVER
TOTAL REM
TIME
DUBB 1
TOTAL REM TRACK
AUTO TRACK
TRACK
TRACK
FINALIZE
English
RECORDING