Sony CDP-CX455 User Manual
Using the Player with Another Component
32
GB
3
Press H to start playing.
The MEGA CONTROL button lights up when a
track in the second player is selected.
The MEGA CONTROL button lights up when a
track in the second player is selected.
To cancel No-Delay/X-Fade Play
Press the corresponding button repeatedly until “NO
DELAY” or “X-FADE” disappears from the display. The
current player continues playing.
DELAY” or “X-FADE” disappears from the display. The
current player continues playing.
z
You can change the method (No-Delay or X-Fade)
during play
during play
Press the corresponding button (NO DELAY or X-FADE)
following the procedure in step 2.
following the procedure in step 2.
z
You can start X-Fade at any point of the track
Press FADER during X-Fade Play.
Even after you have set the X-Fade mode and started
X-Fade play, you can start X-Fade manually at any point
you like. Note that you cannot do this operation while
the sound from both players is mixed.
Even after you have set the X-Fade mode and started
X-Fade play, you can start X-Fade manually at any point
you like. Note that you cannot do this operation while
the sound from both players is mixed.
Notes
• Play starts from the second player if you start play while
the MEGA CONTROL button is lit.
• When one player has played all the discs or tracks in the
player ahead of the other player, play stops.
• Do not use the controls on the second player during
No-Delay/X-Fade Play. They may not work correctly.
Controlling the Player by
Another Unit
Another Unit
When you connect the player to a Sony MD deck
compatible with the Mega Control function, or operate
a Sony MD deck by using computer software such as
“MD Editor,” you must set the player as described
below:
compatible with the Mega Control function, or operate
a Sony MD deck by using computer software such as
“MD Editor,” you must set the player as described
below:
1
Press MENU/NO.
2
Turn the JOG dial until “CONTROL A1 ?” appears
in the display window.
in the display window.
3
Press YES.
“CONTROL A1??” appears in the display.
“CONTROL A1??” appears in the display.
4
Press YES.
To return to normal setting
After following steps 1 and 2, and “CONTROL A1II ?” is
displayed, then press YES.
displayed, then press YES.
Notes
• You can perform the operation above correctly only when
you operate Disc 1 to Disc 200.
• You cannot operate this player correctly from another
player that does not have the CONTROL A1II jack. In this
case, operate the other player from this player.
case, operate the other player from this player.
MENU/NO
YES
JOG