Sony 3-270-589-12 (1) User Manual

107

System Menu

  

C

h

ap
te

r 6

  

M

enu

s

Once the MENU GRADE item has been set to “BASIC”, 
only the basic, top-level menu items appear when you 
press the MENU button and the 

,

/OUT button to display 

the setup menu.

After making menu setting changes, to return settings to 
their factory default settings (setting initialization), use the 
following procedure.

To return a particular setting to its factory default 
setting
In the section , carry out the procedure up to step 5, then 
with the current setting displayed (in the example, if the 
factory default setting has been changed, the current 
setting will be TC MODE), proceed as follows.

Press the RESET button.

“OFF” (factory default setting) is selected.

Press the SET button.

The setting returned to its factory default is saved in 
memory as the current setting.

Display the setup menu.

Press the RESET button.

A message appears, to confirm whether or not you 
wish to return all settings to their factory default 
settings.

Press the SET button.

The message “NOW SAVING...” appears in the 
monitor video section, and “Saving...” appears in the 
time data display, while the settings of all items are 
returned to their factory default settings. These factory 
default settings are saved in memory.

If you power off the unit while settings are being 
saved, settings may not be correctly returned to their 
factory default settings. Wait until the saving is 
completed before powering off the unit.

To abandon the resetting operation
Instead of pressing the SET button, press the RESET 
button. 
The display returns to the top level of setup menu, 
leaving the settings unchanged.

Use the disc menu to delete data on discs and to format 
discs.

For the method of displaying the disc menu, see 
“Displaying the Setup and Disc Menus” (page 90).

The disc menu contains the following items. Characters 
and symbols inside the brackets [ ] appear in the time data 
display section.

STATUS [Status]
Displays disc or clip status.

DISC [> Disc]: Displays the DISC STATUS screen.
CLIP [> Clip]: Displays the CLIP STATUS screen.

The PDZ-1 Proxy Browsing Software allows you to write 
TITLE1 and TITLE2 to the disc, but only TITLE1 appears 
here.

DELETE [Delete]
Deletes clips from the disc.

LAST CLIP [> Last Clip]: Deletes the most recently 

recorded clip.

Initialize all items to factory 
preset values?

Init setup?

SETUP MENU

OPERATIONAL FUNCTION
DISPLAY CONTROL
SETUP BANK OPERATION

MENU GRADE

  BASIC

Current setting

DISC MENU

STATUS

DELETE
FORMAT