Sony 3-270-589-12 (1) User Manual
39
24P (23.98P) Mode Settings
Cha
p
te
r 2
P
repa
ra
ti
ons
timecode at the start of recorded clips may not have a
number of frames that is a multiple of 4. If you want to
make sure that the number of frames in the timecode of
number of frames that is a multiple of 4. If you want to
make sure that the number of frames in the timecode of
the first frames of recorded clips is a multiple of 4, set the
run mode to “REC RUN”, and record after manually
presetting the timecode.
run mode to “REC RUN”, and record after manually
presetting the timecode.
Playback in 24P (23.98P) 2-3 Pulldown Mode
Pulldown playback frame sequences
During pulldown mode playback, playback is carried out
so that the 24-frame timecode set with TIME CODE >PD
PRESET in the setup menu becomes the “A-frame” of the
frame sequence. The following figure shows the playback
frame sequence when 01:00:00:00 has been set for the 24-
so that the 24-frame timecode set with TIME CODE >PD
PRESET in the setup menu becomes the “A-frame” of the
frame sequence. The following figure shows the playback
frame sequence when 01:00:00:00 has been set for the 24-
frame timecode and 10:00:00:00 has been set for the 30-
frame timecode.
frame timecode.
This kind of frame sequence adjustment is not carried out
for clip list playback.
for clip list playback.
Timecode during playback of pulldown
signals
signals
During playback of pulldown signals, timecode is
converted to 30 frames to match the 59.94i video output
signals.
The values of “24F TC” and “30F TC” under TIME CODE
>PD PRESET in the setup menu are used as the conversion
references.
converted to 30 frames to match the 59.94i video output
signals.
The values of “24F TC” and “30F TC” under TIME CODE
>PD PRESET in the setup menu are used as the conversion
references.
To display 30-frame pulldown timecode in the
monitor video display section or on an external
monitor
monitor video display section or on an external
monitor
1
Press the MENU button.
The system menu (see page 90) appears.
2
Press the
M/MARK1 or m/MARK2 button to select
SETUP MENU.
3
Press the
,/OUT button.
The setup menu appears.
4
Press the
M/MARK1 or m/MARK2 button to select
“DISPLAY CONTROL”.
5
Press the
,/OUT button.
The second level of the DISPLAY CONTROL menu
appears.
appears.
6
Press the
M/MARK1 or m/MARK2 button to select
“DISPLAY INFO”.
Note
Frame Count
TC (24F)
Frame Seqence
00:59:59:23
01:00:00:00
01:00:00:01
01:00:00:02
C-frame
D-frame
00:59:59:22
60i: 1frame
24P: 1frame
A-frame
B-frame
C-frame
TC (30F)
60i Pulldown Video
24P Video
09:59:59:28 09:59:59:29 10:00:00:00
10:00:00:02
10:00:00:01
10:00:00:03 10:00:00:04 10:00:00:05
n
n-1
n-2
n+2
01:00:00:04
A-frame
n+4
01:00:00:03
D-frame
n+3
n+1
Timecode
conversion
reference
conversion
reference
SETUP MENU
OPERATIONAL FUNCTION
DISPLAY CONTROL
TIME CODE
DISC PROTECTION
VIDEO CONTROL
AUDIO CONTROL
INTERFACE SELECT
METADATA
SETUP BANK OPERATION
DISC PROTECTION
VIDEO CONTROL
AUDIO CONTROL
INTERFACE SELECT
METADATA
SETUP BANK OPERATION
MENU GRADE : ENHAN
SETUP MENU
DISPLAY CONTROL
CHARA.POSITION
CHARA.TYPE
CHARA.VSIZE
CHARA.POSITION
CHARA.TYPE
CHARA.VSIZE
DISPLAY INFO
SUB STATUS
MENU DISPLAY
BRIGHTNESS
ALARM
MENU STATUS
HD CHARA
MENU DISPLAY
BRIGHTNESS
ALARM
MENU STATUS
HD CHARA
:WHITE
:x1
:x1
:T&STA
:OFF
:WHITE
:55
:ON
:DIS
:ALL
:WHITE
:55
:ON
:DIS
:ALL