Sony Ericsson DVP-NS708H User Manual

• While playing a Super VCD on which the audio 

track 2 is not recorded, no sound will come out 
when you select “2:STEREO,” “2:1/L,” or “2:2/
R.”

• When playing in DVD-VR mode: If you connect 

to an audio component using the DIGITAL OUT 
(COAXIAL)/HDMI OUT jack and want to switch 
between the sound tracks, set “DOLBY 
DIGITAL” to “D-PCM” in “AUDIO SETUP” 
(page 61).

• If “MODE (MP3, JPEG)” is set to “AUTO” or 

“AUTO (BGM)” (page 50), you can hear the 
player’s internal background sound when MP3 is 
not played.

You can check the audio signal format by 
pressing 

 (audio) repeatedly during 

playback. The format of the current audio 
signal (Dolby Digital, DTS, PCM, etc.) 
appears as shown below.

◆When playing a DVD VIDEO

Dolby Digital 5.1 ch

◆When playing a DivX video file on a DATA 
CD or a DATA DVD

MP3 audio

Audio signals recorded in a disc contain the 
sound elements (channels) shown below. 
Each channel is output from a separate 
speaker.
• Front (L)
• Front (R)
• Centre
• Rear (L)
• Rear (R)
• Rear (Monaural): This signal can be either 

the Dolby Surround Sound processed 
signals or the Dolby Digital sound’s 
monaural rear audio signals.

• LFE (Low Frequency Effect) signal

If “DTS” in “AUDIO SETUP” is set to “OFF” 
(page 61), the DTS track selection option will not 
appear on the screen even if the disc contains DTS 
tracks.

1:ENGLISH DOLBY DIGITAL

3 / 2 .1

Rear (L/R)

Front (L/R) 
+ Center

LFE (Low 
Frequency Effect)

1: 

MP3     128k

Bit rate