Roland CD-2i User Manual
132
Troubleshooting
(continued)
CD-Related Problems
(continued)
Problem
Cause and Action
See
Page
Can’t record
●
Could the CD be upside down?
➔
Insert the CD with the label facing upward.
●
Could you be attempting to record on a CD-R/RW disc that has already
been finalized?
been finalized?
➔
Use a blank or un-finalized CD-R/RW disc.
➔
If you want to record on a CD-R/RW disc that has already been finalized,
you’ll need to remove finalization so that the disc can be recorded to
again.
you’ll need to remove finalization so that the disc can be recorded to
again.
—
●
Is it possible that the maximum recordable time or number of tracks
(maximum of 99 tracks) has already been exceeded?
(maximum of 99 tracks) has already been exceeded?
➔
If there are unwanted tracks on the disc, delete them before you
continue recording. (This is only possible on a CD-RW disc.)
continue recording. (This is only possible on a CD-RW disc.)
●
Could you be attempting to record or erase a CD-RW disc more times
than it is capable of?
than it is capable of?
➔
A CD-RW disc can be recorded and erased approximately 1,000 times.
—
●
Could you be attempting to record an extremely short performance?
➔
You can’t record for less than four seconds.
After recording, the CD
won’t play back on a
conventional CD player
won’t play back on a
conventional CD player
●
Did you finalize the disc after recording?
➔
Execute the Finalize operation.
●
Is your CD player able to play back CD-R or CD-RW discs?
➔
If your CD player does not support CD-R or CD-RW discs, they may not
play back correctly.
play back correctly.
—
The disc tray will not
open
open
●
Is the CD-2i powered up?
➔
Turn on the power of the CD-2i.
➔
If a power failure has occurred, you can use the emergency eject hole to
open the disc tray manually.
open the disc tray manually.
CD-R/RW drive produces
significant mechanical
noise when operating
significant mechanical
noise when operating
●
Could you be using a high-speed compatible CD-RW disc?
➔
If you’re using a high-speed compatible CD-RW disc, performing the
following operations will cause the disc to rotate at high speed,
producing a greater level of mechanical noise. This is not a malfunction.
following operations will cause the disc to rotate at high speed,
producing a greater level of mechanical noise. This is not a malfunction.
• When you stop recording
• When you assign a song number
• When you delete a track
• When you finalize
If you find the mechanical operating noise of the CD-R/RW drive
objectionable, please use an 8x compatible CD-R disc or a 1-4x
compatible CD-RW disc.
objectionable, please use an 8x compatible CD-R disc or a 1-4x
compatible CD-RW disc.
—
CD-2i_e.book 132 ページ ２０１０年３月１５日 月曜日 午前１０時１５分